SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Brick Blacksmith's Forge with a Bottom-Blast Tuyere
Forge

Dibuat oleh

Forge

11. Oktober 2026NO
22
0
0
0
0

Brick Blacksmith's Forge with a Bottom-Blast Tuyere

A forge is a hearth with a bowl for the fire and an opening in its bottom, the tuyere, through which the blast of air is forced. One smith's forge of the 1880s was two feet four inches high and four feet square, built of brick and stone, with a 12-inch chimney flue, the tuyere iron set four inches below the surface and the forge hollow underneath so the fire could be dumped and the ashes cleared. Advice of the same time: keep the tuyere's centre at least eighteen inches from the back wall and the working side, set its top four to six inches below the hearth (deeper for heavy work), and leave a recess in the back wall at least 8 inches deep, 24 high and 24 wide. The blast came from a blower or bellows.
Menengah
Several days

Instruksi

1

Build the base

Build the hearth of brick and stone, about two feet four inches high and four feet square (one smith's size), hollow underneath with an opening for the ash.

Material untuk langkah ini:

Batu bata lempung bakarBatu bata lempung bakar1 as required
Batu-batuBatu-batu1 as required

Alat yang dibutuhkan:

Sendok semen tukang batuSendok semen tukang batu
2

Back wall and recess

Raise the back wall and chimney with a 12-inch flue; leave a recess at least 8 in deep, 24 in high and 24 in wide behind the fire.

Material untuk langkah ini:

Pipa cerobong asapPipa cerobong asap1 buah

Alat yang dibutuhkan:

Sendok semen tukang batuSendok semen tukang batu
3

Set the tuyere

Set the tuyere with its centre at least 18 in from the back wall and the working side, its top 4–6 in below the hearth surface.

Material untuk langkah ini:

Tuyer besi tuangTuyer besi tuang1 buah
4

Blast

Connect the blower or bellows to the tuyere pipe, with a way to open it underneath and clear cinders.

Alat yang dibutuhkan:

Blower tempa engkol tanganBlower tempa engkol tangan

Bahan

4

Alat yang Diperlukan

2

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...