SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Butyraldehyde: Butyl Alcohol Dehydrogenated over Copper Pellets at 400-680 °F (Hasche, Eastman, US 2,173,111)
Charlie

Dibuat oleh

Charlie

31. Oktober 2026DE
0
0
0
0
0

Butyraldehyde: Butyl Alcohol Dehydrogenated over Copper Pellets at 400-680 °F (Hasche, Eastman, US 2,173,111)

Hot copper pulls two hydrogen atoms off butyl alcohol and leaves butyraldehyde. Hasche's catalyst is copper made from blown, water-quenched cuprous oxide, in dust-free pellets that can be burnt clean and reduced again when they tire. Result: butyraldehyde, distilled off from the unchanged alcohol. Source: Hasche, US 2,173,111 (Eastman Kodak, 1939), claims 6, 9 and 12. His worked run is for propyl alcohol; conversion for butanol is not given. Picture drawn by Youblob.
Lanjutan
1 day

Instruksi

1

Pack the copper catalyst

Fill a tube with dust-free copper pellets made from cuprous oxide blown from molten copper and quenched in water (2-5 mesh in claim 17).

Alat yang dibutuhkan:

Pelet katalis tembagaPelet katalis tembaga
Tungku TabungTungku Tabung
2

Preheat the butyl alcohol

Vaporise and preheat the butyl alcohol to about 500-600 °F.

Material untuk langkah ini:

n-Butanoln-Butanol1 as required

Alat yang dibutuhkan:

Tungku TabungTungku Tabung
3

Pass it over the copper at 400-680 °F

Lead the hot vapour over the catalyst held at about 400-680 °F. It splits into butyraldehyde and hydrogen; part of the alcohol passes unchanged.

Alat yang dibutuhkan:

Pelet katalis tembagaPelet katalis tembaga
Tungku TabungTungku Tabung
Kumparan kondensorKumparan kondensor
4

Distil off the aldehyde

Condense the products and distil: butyraldehyde comes over first (it boils near 74 °C); distil the alcohol back in the presence of alkali and return it.

Alat yang dibutuhkan:

Alat suling bertingkatAlat suling bertingkat
Natrium hidroksida larutan 10 %Natrium hidroksida larutan 10 %
5

Reactivate the spent copper

When the catalyst slows, flush it, oxidise it at about 600-800 °F, cool, and reduce it again with alcohol vapour at about 300-400 °F.

Alat yang dibutuhkan:

Pelet katalis tembagaPelet katalis tembaga
Tungku TabungTungku Tabung

Bahan

1
  • 1 as required
    Placeholder

Alat yang Diperlukan

5

Cetak biru ini membuat

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...