Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Cetak BiruTEKNOLOGI
TEKNOLOGI
1.319 cetak biru tersedia • 8 subkategori
Jelajahi Subkategori
Cetak Biru (1.319)

Fermenter Lid with Airlock Seat, 3D Printed in PETG
oleh 3DBonanza
Bir
0
0
0
0
0
0

Three-Piece Airlock, 3D Printed in PETG
oleh 3DBonanza
Bir
0
0
0
0
1
0

Self-Watering Plant Station with ESP32 and OLED
oleh Ed
Elektronik
4
0
0
0
0
0

ESP32 Self-Watering Pot Controller
oleh Ed
Industry 4.0 — Computers & Digital Automation (1960)
2
0
0
0
0
0

Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)
oleh Forge
Pengerjaan Logam
6
0
0
0
0
0

Pyrolusite Manganese Ore: Mined from Clay, Washed, Screened, Hand-Sorted, Dried and Ground (Harder, USGS 1910)
oleh Charlie
Pertambangan
3
0
0
0
0
0

Rotary Lawn Sprinkler: a Barker's-Mill Head Turning on Balls Round the Supply Pipe (Gibbs, 1901)
oleh Forge
Musim Panas
10
0
0
0
0
0

The Centre-Fire Cartridge With an Anvil (Boxer, 1866-1869) - History and How It Works
oleh Charlie
Persenjataan
3
0
0
0
0
0

The Lever-Action Magazine Rifle (B. Tyler Henry, 1860) - History and How It Works
oleh Charlie
Persenjataan
1
0
0
0
0
0

The Bored-Through Cylinder and the Self-Contained Cartridge (Rollin White, 1855) - History and How It Works
oleh Charlie
Persenjataan
3
0
0
0
0
0

The Revolver: Several Chambers Turning Behind One Barrel (Colt, 1836 and 1839) - History and How It Works
oleh Charlie
Persenjataan
2
0
0
0
0
0

Cam-Arm Tubing Cutter: Two Swinging Arms Keep the Wheel and Rollers Evenly Round Any Tube (Lutsker, 1959)
oleh Forge
Pengerjaan Logam
9
0
0
0
0
0

Sprung-Leg Tubing Cutter: a Bent Rod With a Disk Outside and a Roller Inside, the Handle's Screw Bends One Leg In (Zeiler, 1958)
oleh Forge
Pengerjaan Logam
8
0
0
0
0
0

Slip-Knob Tube Cutter: the Feed Knob Turns the Screw Through Spring-Loaded Plates and Slips Before the Tube Is Crushed (Parker, 1944)
oleh Forge
Pengerjaan Logam
8
0
0
0
0
0

Swing-Nut Tubing Cutter: Swing the Blade Support Down and the Jaw Slides to the Tube, Up and the Screw Feeds It (Pritchard, 1941)
oleh Forge
Pengerjaan Logam
13
0
0
0
0
0

V-Slide Tubing Cutter: Two Slide Halves Held on the Ways by One Spring Clip, a Reamer on the Frame (Thewes, 1938)
oleh Forge
Pengerjaan Logam
13
0
0
0
0
0

Reversible-Tip Soft-Face Hammer: Domed Rubber Tips Locked in Screw-On Sockets by an Internal Rib (West & Robinson, 1962)
oleh Forge
Pengerjaan Logam
11
0
0
0
0
0

Threaded-Stud Rubber-Head Hammer: Heads Screw Onto the Body's Own Studs and Lock the Handle's Nail In (Dicks, 1951)
oleh Forge
Pengerjaan Logam
9
0
0
0
0
0

Screw-On Rubber Head Mallet: Rubber Members on Flanged Ferrules, Cupped and Cushioned on Steel Studs (Pemmerl, 1950)
oleh Forge
Pengerjaan Logam
5
0
0
0
0
0

Renewable Rubber-Face Hammer: Rolled Faces Pressed Onto Pronged Discs, Driven Out Through a Notch When Worn (Sewell, 1928)
oleh Forge
Pengerjaan Logam
10
0
0
0
0
0

Laminated Rubber Mallet: A Rubber-and-Canvas Head Locked on a Flared Handle by an Internal Rib (Whisler, 1924)
oleh Forge
Pengerjaan Kayu
9
0
0
0
0
0

Laminate Bevel Trimmer: Two Pads at Right Angles Hold a Small Router at 45 Degrees on a Corner (Roche, 1971)
oleh Forge
Pengerjaan Kayu
6
0
0
0
0
0

Rack-and-Pinion Router With a Zero-Set Knob: Two Knobs on One Hollow Pinion, Set to Zero on the Work (Rees, 1969)
oleh Forge
Pengerjaan Kayu
7
0
0
0
0
0

Three-Legged Router: A T-Frame on the Table Beside the Work, Its Depth Set by a Knob While Cutting (Willard & Young, 1939)
oleh Forge
Industry 3.0 — Assembly Line & Mass Production (1913)
7
0
0
0
0
0
Menampilkan 24 dari 1319