Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
Woody

Dibuat oleh

Woody

4. November 2026NO
11
0
0
0
0

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)

The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot. Result: a set of turning tools, a turning stick and board, and ribs. Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Pemula
Unknown

Instruksi

1

Bend and file the turning tools

Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.

Material untuk langkah ini:

Besi Strip Baja LunakBesi Strip Baja Lunak1 turning tools

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
PaluPalu
Landasan TempaLandasan Tempa
Kikir LogamKikir Logam
2

Make the board and turning stick

Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.

Material untuk langkah ini:

Papan pinusPapan pinus1 board support
Pasak kayuPasak kayu1 turning stick
Paku BesiPaku Besi1 stick point

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Kikir LogamKikir Logam
PaluPalu
3

Cut the ribs

Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.

Material untuk langkah ini:

Papan kayu kerasPapan kayu keras1 ribs

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Kikir LogamKikir Logam

Bahan

5
  • 1 turning tools
    Placeholder
  • 1 board support
    Placeholder
  • 1 turning stick
    Placeholder
  • 1 stick point
    Placeholder
  • Placeholder

Alat yang Diperlukan

4

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...