Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Coil Spring: Small Springs Wound Through a Nut (Boy Mechanic, 1915)
Small, even coil springs wound by hand: spring wire is turned round a rod that runs through a nut held in a vise, and the nut's thread lays every coil at the same pitch.
Variable: the nut's thread pitch gives open or closed coils.
Source: The Boy Mechanic, Book 2 (1915), p. 197. Picture: the book's sketch.
Pemula
Unknown
Instruksi
1
1
Prepare the nut and rod
Prepare the nut and rod
Take a nut whose thread will take the spring wire, and file a small notch, as deep as the thread, where the thread starts. Take a smooth rod that passes snugly through the nut. Shape one end to fit a brace (or a drill chuck) and drill a hole across the other end for the wire.
Alat yang dibutuhkan:
Mur Segi Enam
Batang Baja Lunak
Kikir Logam
Bor tangan2
2
Wind the spring
Wind the spring
Bend the end of the wire at right angles and push it into the hole. Grip the nut in a vise, put the rod through it, and turn the rod with the brace, guiding the wire into the notch at the start of the thread. The wire follows the thread and comes out as an even spring. Cut it to length.
Material untuk langkah ini:
Kawat baja pegas1 buahAlat yang dibutuhkan:
Ragum Meja
Bor engkol dan mata bor
Gunting sengBahan
1- 1 buahPlaceholder
Alat yang Diperlukan
7- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Bahan cetak biru terhubung
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

