Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Combination Lock: a Five-Disc Drawer Lock (Boy Mechanic, 1915)
A keyless lock fitted inside a drawer front: five brass discs on a pin, turned by pins from a knob and dial outside. When the notches line up the latch drops; turning back raises it into its keeper.
The combination is changed by moving the pins in the discs.
Source: The Boy Mechanic, Book 2 (1915), p. 169. Picture: Figs. 1-2 of the book.
Menengah
Unknown
Instruksi
1
1
Cut the five discs
Cut the five discs
Cut five discs of sheet brass about 1/16 in thick and 1 1/2 in across. Drill each for a driving pin 15/32 in from the centre and press the pin in. Notch discs C, D and E for the latch; shape disc B as a cam to lift the latch into its keeper; leave disc A plain with only its pin (Fig. 1).
Material untuk langkah ini:
Lembaran Kuningan1 discs
Logam tidak diketahui1 driving pinsAlat yang dibutuhkan:
Jangka tusuk
Gunting seng
Kikir Logam
Bor tangan
Palu2
2
Mount the discs
Mount the discs
Inside the drawer front fit a U-shaped metal bracket F carrying a 1/4 in pin G. Thread the discs on it with rubber washers H to M between them so they don't turn too freely. Fix disc A tight on the end of a 1/4 in rod N that passes out through the front.
Material untuk langkah ini:
Lembaran baja1 U-bracket F
Batang Baja Lunak1 pin G, rod N
Bahan tidak diketahui5 rubber washersAlat yang dibutuhkan:
Bor tangan
Bor engkol dan mata bor
Gunting seng3
3
Fit knob, dial and latch
Fit knob, dial and latch
Make the knob of two pieces of wood screwed together with a pointer between them, fit it on rod N with a washer against the drawer. Paste on a paper dial with division marks and numbers. Fit the latch T in a U-shaped metal piece U inside the drawer end so its heel rests on the disc edges, with its keeper above. To find the combination, open the drawer and turn the knob until each notch comes under the latch heel, noting the number under the pointer each time.
Material untuk langkah ini:
Balok Kayu Keras2 knob
Logam tidak diketahui1 pointer, latch, keeper
Ring Rata1 buah
Kertas1 dial
Lembaran baja1 U-piece
Sekrup kayu1 buahAlat yang dibutuhkan:
Obeng pipih
Gunting sengBahan
9- 1 discsPlaceholder
- 1 pointer, latch, keeperPlaceholder
- 1 U-piecePlaceholder
- 1 pin G, rod NPlaceholder
- 5 rubber washersPlaceholder
- 2 knobPlaceholder
- 1 buahPlaceholder
- 1 dialPlaceholder
- 1 buahPlaceholder
Alat yang Diperlukan
7- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.
