Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Two-Part Soap Dish: a Studded, Drained Tray on a Scallop-Edged Base That Lets Air Under the Soap (Conkling, 1901)
Clay

Dibuat oleh

Clay

13. November 2026DK
4
0
0
0
0

Two-Part Soap Dish: a Studded, Drained Tray on a Scallop-Edged Base That Lets Air Under the Soap (Conkling, 1901)

Allen Conkling of Chicago received US 679,110, dated 23 July 1901, for a soap dish in two parts that keeps soap dry. The upper tray holds the soap on little rounded studs above drain holes; it sits on a lower dish whose edge is scalloped, so air flows in underneath, up through the holes and round the soap. The lower part lifts off to be cleaned. We make it from stoneware clay. All sizes are ours.
Pemula
About 3 hours plus drying and firing

Instruksi

1

Shrinkage

Memuat notebook Jupyter…
2

Read US 679,110

"A circulation of air is thus established through the spaces at the edges of the lower part, thence through the drain-openings in the outer or upper part to and around the soap, which soon dries the same after use."
3

Make the upper tray

Roll a slab of stoneware clay about 6 mm thick (ours). Cut the tray's bottom and a strip for its retaining wall, score and slip the joins and join them. Roll small balls, flatten them slightly and join them to the bottom inside as his rounded studs A2. Pierce drain holes A3 between the studs with a tool.

Material untuk langkah ini:

Lempung stonewareLempung stoneware1 buah

Alat yang dibutuhkan:

Penggilas adonanPenggilas adonan
Set perkakas tanah liatSet perkakas tanah liat
Alat penggores tanah liatAlat penggores tanah liat
4

Add the flange

Join a narrow strip round the underside of the tray, a little in from its edge, so it hangs down as his flange A4 and will sit over the lower part's rim.

Material untuk langkah ini:

Lempung stonewareLempung stoneware1 buah

Alat yang dibutuhkan:

Set perkakas tanah liatSet perkakas tanah liat
Alat penggores tanah liatAlat penggores tanah liat
5

Make the lower part

Make a shallow dish of the same outline, sized so its rim fits inside the tray's flange. Cut scallops into the top of its rim, his B', so there are gaps for air when the tray sits on it.

Material untuk langkah ini:

Lempung stonewareLempung stoneware1 buah

Alat yang dibutuhkan:

Penggilas adonanPenggilas adonan
Set perkakas tanah liatSet perkakas tanah liat
Alat penggores tanah liatAlat penggores tanah liat
6

Dry, glaze and fire

Let both parts dry slowly under loose cover, fire them to bisque, dip them in glaze with tongs (wipe the glaze off the rim and flange where they touch the kiln shelf), and glaze-fire them, both as the clay and glaze makers specify.

Material untuk langkah ini:

Glasir beningGlasir bening1 buah

Alat yang dibutuhkan:

Tungku PembakaranTungku Pembakaran
Set perlengkapan tungkuSet perlengkapan tungku
Penjepit celup glasirPenjepit celup glasir
7

Use it

Set the tray on the lower part with the flange over the rim. Water from the soap drains through the holes into the lower part; lift the tray off to empty and clean it.
8

Troubleshooting

Soap dish troubleshooting.

Flow

Loading...
9

History and honest limits

**Allen Conkling** of Chicago, US 679,110, dated 23 July 1901, filed 7 March 1901. He claimed "a soap-dish formed of two parts, the upper part forming a supporting-tray having a retaining-wall, perforated bottom and studs above the same, and a retaining-flange extending downward from the bottom of said upper part to fit the upper edge of the lower part, and a lower part having an upper edge scalloped". He made the parts to be molded and names no material; the stoneware, slab-building, glaze, firing and all sizes are ours.

Bahan

2

Alat yang Diperlukan

6

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...