Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Crutch: a Split Broom-Handle Crutch (Boy Mechanic, 1913)
A crutch made to the user's own length from a broom handle: split, soaked and spread into a Y, with a riveted hand grip and a shaped top piece nailed across for the armpit.
Make two for a pair.
Source: The Boy Mechanic, Book 1 (1913), p. 369. Picture: Figs. 1-3 of the book.
Pemula
Unknown
Instruksi
1
1
Split and soak the handle
Split and soak the handle
Split a broom handle with a rip saw to within 1 ft of one end (Fig. 1). Soak it in water for three days so the halves will bend.
Material untuk langkah ini:
Pasak kayu1 broom handleAlat yang dibutuhkan:
Gergaji belah
Air2
2
Fit the grip
Fit the grip
Cut a grip as long as the hand is wide and bore it through the centre to take No. 10 wire. Set it between the two halves at the right height for the arm, run the wire through both halves and the grip, and rivet it over (Fig. 2).
Material untuk langkah ini:
Pasak kayu keras1 grip
Kawat besi1 No. 10Alat yang dibutuhkan:
Gergaji Tangan
Bor engkol dan mata bor
Gunting seng
Palu3
3
Nail on the top piece
Nail on the top piece
Cut a top piece shaped as at A, Fig. 3, and nail it across the upper ends of the two halves.
Material untuk langkah ini:
Papan pinus1 top piece
Paku1 buahAlat yang dibutuhkan:
Gergaji Tangan
PaluBahan
5- 1 broom handlePlaceholder
- 1 gripPlaceholder
- 1 No. 10Placeholder
- 1 top piecePlaceholder
- 1 buahPlaceholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.
