SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Cyanoacrylate Adhesive
Harry Coover first met cyanoacrylates in 1942 while looking for a clear plastic for gun sights, and rejected them because they stuck to everything. In 1951 at Eastman Kodak he and Fred Joyner met them again - and this time saw a glue that set in seconds with no heat or pressure. It was sold from 1958.
**US 2,794,788**, "Adhesive compositions containing alkyl esters of cyanoacrylic acid", Coover and Shearer, Eastman Kodak, filed 1. November 1952, granted 4. June 1957, claims the monomeric alkyl α-cyanoacrylate adhesive. **US 2,768,109**, "Alcohol-catalyzed alpha-cyanoacrylate adhesive compositions", Coover, filed 2. June 1954, granted 23. October 1956, claims "strongly bonding wood having an acidic surface character" by first moistening it with an alcohol of 1 to 8 carbon atoms.
**You test that second claim on oak**, an acidic wood: dry, wiped with isopropyl alcohol, and misted with water.
Pemula
1 hour plus 24 h
Instruksi
1
1
Cut the strips
Cut the strips
Saw eighteen oak strips 80 x 20 mm, about 5 mm thick. Sand one end face of each with 180 grit and dust off. Pencil-mark three groups: dry, IPA, water.
Material untuk langkah ini:
Papan ek putih1 buah
Amplas1 lembarAlat yang dibutuhkan:
Gergaji Tangan2
2
Prepare the surfaces
Prepare the surfaces
Leave the first group dry. Wipe the ends of the second with isopropyl alcohol on a towel and use them within a minute. Give the third one light mist of water and blot. Note the room humidity.
Material untuk langkah ini:
Alkohol Isopropil 99 %10 ml
Tisu dapur2 lembarAlat yang dibutuhkan:
Botol semprot air
Higrometer (pengukur kelembapan)3
3
Glue and time
Glue and time
Gloves and glasses on. One drop of CA on one end, overlap a partner strip by 20 mm, press 5 seconds and start the stopwatch. Every 10 seconds hang the spring scale from the free strip and pull to 2 N: record when it first holds. Three joints per group.
Material untuk langkah ini:
Lem instan (sianoakrilat)1 buahAlat yang dibutuhkan:
Stopwatch
Neraca Pegas (Pengukur Gaya)
Sarung Tangan Nitril
Kacamata Pengaman Bening4
4
Break them tomorrow
Break them tomorrow
After 24 hours clamp one strip of each joint in the vise and tap the free end sideways with the mallet until it breaks. Estimate how much of the bond area is torn wood.
Alat yang dibutuhkan:
Ragum Meja
Palu karetKacamata Pengaman Bening5
5
Set times and joints
Set times and joints
Memuat notebook Jupyter…
6
6
History & Context
History & Context
**What the patents specify:** a monomeric alkyl α-cyanoacrylate adhesive held liquid by an acid inhibitor, and, for acidic surfaces, a prior wipe with a C1–C8 alcohol. **Modern build (derived):** hardware-store CA glue on oak.
CA spread from industry to every workshop, and in the Vietnam War medics used a CA spray to seal wounds; purpose-made medical grades followed. Its limits: brittle joints that fail in peel and impact, poor gap filling, and it bonds skin instantly - acetone releases it.
Bahan
5- 1 buahPlaceholder
- 1 lembarPlaceholder
- Placeholder
- 2 lembarPlaceholder
- Placeholder
Alat yang Diperlukan
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.