Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)
Forge

Dibuat oleh

Forge

14. November 2026NO
8
0
0
0
0

Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)

How axes and hatchets were made of iron and shear steel, from George Edwinson's smithing series (Amateur Work, 1886): a flat iron bar folded round a tapering mandrel to make the eye, the leaves welded, and a thin slice of steel welded between them so the ground edge is always steel.
Lanjutan
A day at the forge

Instruksi

1

Read Edwinson

"By this means a layer of steel is enclosed between two layers of iron, and a steel edge is always ensured to the tool."
2

Fold the eye

Take flat iron of the width and thickness you want, twice the length of the blade. Heat it and bend it over a tapering mandrel the same section as the handle (his fig. 225).

Material untuk langkah ini:

Batang besi tempaBatang besi tempa1 buah

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Landasan TempaLandasan Tempa
GodamGodam
Tang pandai besiTang pandai besi
Pelebar lubang tirusPelebar lubang tirus
3

Close and shape the eye

Weld the two leaves together where they meet near the eye. Reheat and forge the eye to shape on the mandrel, then drive the mandrel in the other way to open the inner edge of the eye slightly.

Material untuk langkah ini:

Serbuk boraksSerbuk boraks1 buah

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Landasan TempaLandasan Tempa
PaluPalu
Pelebar lubang tirusPelebar lubang tirus
4

Lay in the steel

Put a thin slice of shear steel, as wide as the axe, between the two leaves. Bring both to a welding heat and forge them down together to the thickness and width wanted.

Material untuk langkah ini:

Pelat baja shearPelat baja shear1 buah
Serbuk boraksSerbuk boraks1 buah

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Landasan TempaLandasan Tempa
GodamGodam
Tang pandai besiTang pandai besi
5

Hatchet hammer (variant)

For a carpenter's hatchet (fig. 223) weld a rectangular piece of steel to the back of the eye and forge it down with it as the hammer. The miner's hatchet (fig. 224) has a massive ear, a bar-steel hammer and a slit in the blade for drawing nails. Do not make a woodman's axe square-headed: men drive wedges with the back and spoil it.

Material untuk langkah ini:

Baja krusibelBaja krusibel1 buah

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Landasan TempaLandasan Tempa
PaluPalu
Pahat panasPahat panas
6

Pare and smooth

Pare the rough forging to shape with hot chisels (his setts) while hot. Hammer the sides well at a low red heat until smooth.

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Pahat panasPahat panas
Landasan TempaLandasan Tempa
PaluPalu
7

Harden, temper and grind

Harden and temper the blade, then grind it on a grindstone to sharpen the edge and polish the blade.

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Ember pendingin tempaEmber pendingin tempa
Batu asah rodaBatu asah roda
8

Hang the head (ours)

He does not cover the handle. Ours: fit a hickory handle blank to the eye and wedge it.

Material untuk langkah ini:

Balok bakal gagang kapak (hikori)Balok bakal gagang kapak (hikori)1 buah
Baji kayuBaji kayu1 buah

Alat yang dibutuhkan:

Pisau TarikPisau Tarik
PaluPalu
9

Troubleshooting

Axe troubleshooting.

Flow

Loading...
10

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and figs. 222-225. He gives no temper colour for axes, no sizes and no handle: those are ours.

Bahan

6

Alat yang Diperlukan

10

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...