Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)
The builder's and fencer's crowbar from George Edwinson's smithing series (Amateur Work, 1886): a round iron bar 2 to 5 ft long with steel-pointed ends, one forged to a chisel, the other split hot into a fork and bent over into a nail-drawing claw, tempered purple.
Menengah
Half a day at the forge
Instruksi
1
1
His sizes
His sizes
Memuat notebook Jupyter…
2
2
Read Edwinson
Read Edwinson
"It is an ordinary round bar of iron with steel-pointed ends."
3
3
Choose the bar
Choose the bar
Take round bar iron of 1, 1 1/4 or 1 1/2 in (25, 32 or 38 mm), 2 to 5 ft (0.6-1.5 m) long. A bar of best tool steel may be lighter.
Material untuk langkah ini:
Batang besi tempa1 buahAlat yang dibutuhkan:
Pahat panas4
4
Steel the ends (ours, after his pick method)
Steel the ends (ours, after his pick method)
Split each end hot, weld a steel wedge into the cleft under borax and draw it out, as for a pick point.
Material untuk langkah ini:
Baja krusibel1 buah
Serbuk boraks1 buahAlat yang dibutuhkan:
Perapian pandai besi
Pahat panas
Landasan Tempa
Godam
Tang pandai besi5
5
Forge the chisel end
Forge the chisel end
Forge one end to a chisel shape. Keep the steel no hotter than red and hammer it lightly at that heat.
Alat yang dibutuhkan:
Perapian pandai besi
Landasan Tempa
Palu
Tang pandai besi6
6
Forge the claw
Forge the claw
Forge the other end to a chisel shape too, split it hot into a fork with the hot chisel, and bend the fork over to form the claw. For a quarryman's bar leave out the claw and bend one chisel end over as a short lever.
Alat yang dibutuhkan:
Perapian pandai besi
Pahat panas
Landasan Tempa
Palu
Tang pandai besi7
7
Harden and temper
Harden and temper
Harden the steeled ends and temper them to a purple, the best tint for crowbars.
Alat yang dibutuhkan:
Perapian pandai besi
Ember pendingin tempa8
8
Troubleshooting
Troubleshooting
Crowbar troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and fig. 220. The steel wedges follow his pick method; the metric figures and tools are ours.
Bahan
3- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.


