Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)
How a village smith made picks in the 1880s, from George Edwinson's smithing series in Amateur Work: an iron head welded round its eye, the ends split hot and steel wedges welded in, then hardened and tempered. Variants: the common pick, the pickaxe with a steel-laid axe blade, and the miner's pick with a steel-faced hammer end.
Lanjutan
A day at the forge
Instruksi
1
1
Read Edwinson
Read Edwinson
"The eye or hole for the shaft is formed by first shaping the two sides ... and then welding the two parts together."
2
2
Form the eye
Form the eye
Forge the two halves of the head with a hollow for the eye in each (his fig. 216), lay them together and weld them into one head round the eye (fig. 217).
Material untuk langkah ini:
Batang besi tempa1 buahAlat yang dibutuhkan:
Perapian pandai besi
Landasan Tempa
Palu
Tang pandai besi
Pelebar lubang tirus3
3
Draw the ends
Draw the ends
Forge the two ends down to the size you need: a pointed bill and a chisel bill for the common pick, an axe and a point for the pickaxe, a point and a hammer for the miner's pick. For the miner's pick leave the eye massive and oval, tapering from both sides as in a hammer.
Alat yang dibutuhkan:
Perapian pandai besi
Landasan Tempa
Palu
Godam4
4
Steel the points
Steel the points
Split each bill end with a hot chisel (his hot sett, fig. 218), insert a wedge of steel in the cleft and weld it in under borax, then draw it out to shape. Do not heat cast steel above a cherry red.
Material untuk langkah ini:
Baja krusibel1 buah
Serbuk boraks1 buahAlat yang dibutuhkan:
Perapian pandai besi
Pahat panas
Godam
Landasan Tempa
Tang pandai besi5
5
Steel the axe or hammer end
Steel the axe or hammer end
Pickaxe: enclose a slice of shear steel between the folding leaves of iron at the axe end and forge them down together to form the axe. Miner's pick: face the hammer end with steel.
Material untuk langkah ini:
Pelat baja shear1 buah
Serbuk boraks1 buahAlat yang dibutuhkan:
Perapian pandai besi
Landasan Tempa
Palu
Tang pandai besi6
6
Harden and temper
Harden and temper
Harden the points and temper them to a brown tint tending to straw at the very point. Temper the pickaxe blade purple where steel meets iron, running to straw at the edge.
Alat yang dibutuhkan:
Perapian pandai besi
Ember pendingin tempa7
7
Handle it (ours)
Handle it (ours)
He does not cover the handle. Ours: shape an ash handle to the eye, drive it in and wedge it.
Material untuk langkah ini:
Bilet kayu ash1 buah
Baji kayu1 buahAlat yang dibutuhkan:
Pisau Tarik
Palu8
8
Troubleshooting
Troubleshooting
Pick troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond). He gives no dimensions or weights; the sizes, the handle and the tools listed are ours.
Bahan
6- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
- 1 buahPlaceholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.



