SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Youblob · CC0
Elastic Cord: Cotton Braided over a Stretched Rubber Strand (Blakesley 1889)
Braid cotton round a rubber strand while the rubber is stretched, and the cord springs back when it is let go. Gilbert Blakesley of Bristol, Connecticut set the stretch so that the braid stops the cord before the rubber is pulled past the point it fully recovers from, and so that at rest the rubber carries no tension at all. The braid protects the rubber and it lasts.
Source: G. H. Blakesley, US 411,416 (1889). The rubber strand is our rubber thread blueprint; the tools are ours. Picture drawn by Youblob.
Menengah
2 hours
Instruksi
1
1
Feed the rubber under tension
Feed the rubber under tension
Pass a long rubber strand, or several, under tension through a braiding machine. Round or flat, one strand or more: Blakesley says it does not matter.
Material untuk langkah ini:
Benang karet1 as requiredAlat yang dibutuhkan:
Mesin kepang2
2
Braid on a cotton cover
Braid on a cotton cover
Let the machine braid a covering of cotton thread over the stretched rubber with a rapid feed.
Material untuk langkah ini:
Benang Katun1 as requiredAlat yang dibutuhkan:
Mesin kepang3
3
Set tension against feed
Set tension against feed
Adjust the rubber tension and the braider feed so that, when the cord is pulled, the braid reaches its full length before the rubber reaches its safe stretch, the stretch it fully recovers from without risk of breaking. At rest, the rubber should be under no tension at all.
Alat yang dibutuhkan:
Mesin kepang
Penggaris4
4
Optional soft second cover
Optional soft second cover
For a softer cord, pass it again, under tension, through a braider that lays a loose second covering of soft thread such as silk or wool.
Material untuk langkah ini:
Benang sutra1 as requiredAlat yang dibutuhkan:
Mesin kepang5
5
Reel it
Reel it
Wind the cord on a reel as it leaves the braider.
Alat yang dibutuhkan:
Set kelos benangBahan
3- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

