Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Enamelled Copper Magnet Wire
Emma

Dibuat oleh

Emma

11. Oktober 2026SE
26
0
0
3
0

Enamelled Copper Magnet Wire

Magnet wire, the wire wound into motors, transformers, coils and loudspeakers, is copper wire with a very thin layer of insulation. Despite the name, the "enamel" is not glass but a polymer film. The usual process runs in one continuous line: the wire is annealed to make it soft and flexible, passes through a bath of enamel, a polymer such as polyurethane, polyester, polyamide or polyimide dissolved in solvent, then through a die that leaves only a thin even layer, and up through a vertical oven that first drives off the solvent and then cures the film. One coat is too thin, so the wire goes round many times, building the insulation up layer by layer.
Lanjutan
Continuous (industrial)

Instruksi

1

Anneal

Copper wire of the final diameter runs through an annealing oven to make it soft and flexible.

Material untuk langkah ini:

Kawat TembagaKawat Tembaga100 kg

Alat yang dibutuhkan:

Tungku anilTungku anil
2

Coat

The wire passes through a bath of enamel, a polymer dissolved in solvent.

Material untuk langkah ini:

Email kawat (larutan polimer)Email kawat (larutan polimer)5 liter

Alat yang dibutuhkan:

Lini pelapisan email kawatLini pelapisan email kawat
3

Size the coat

A die lets through only the wire and a thin layer of enamel; the rest is wiped back.

Alat yang dibutuhkan:

Lini pelapisan email kawatLini pelapisan email kawat
4

Dry and cure

The wire rises through a vertical oven: cooler at the bottom to drive off the solvent, hotter at the top to cure the film.

Alat yang dibutuhkan:

Lini pelapisan email kawatLini pelapisan email kawat
5

Repeat and check

The wire makes several passes until the insulation is thick enough, then the overall diameter is measured and it is spooled.

Alat yang dibutuhkan:

Lini pelapisan email kawatLini pelapisan email kawat
MikrometerMikrometer

Bahan

2

Alat yang Diperlukan

3

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...