SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Ferroboron: Colemanite Reduced by Ferrosilicon above 2000 °C in an Arc Furnace (Hansen, GE, US 982,135, 1911)
Ferroboron should carry little carbon, so Hansen reduced the boron mineral colemanite with silicon instead of coke. The silicon takes the oxygen, joins the lime as a calcium silicate slag, and the boron goes into the iron of the ferrosilicon.
Result: ferroboron, low in carbon, under a clean slag.
Source: Hansen, US 982,135 (1911). Not given: weights, boron content. Picture drawn by Youblob.
Lanjutan
1 day
Instruksi
1
1
Dehydrate the colemanite at 450 °C
Dehydrate the colemanite at 450 °C
Heat colemanite to about 450 °C in a suitable container to drive off its water.
Material untuk langkah ini:
Kolemanit1 as requiredAlat yang dibutuhkan:
Tungku Muffle2
2
Powder and mix with ferrosilicon
Powder and mix with ferrosilicon
Grind it and mix with powdered ferrosilicon: enough silicon to reduce all the boron and slag off the lime. The amount depends on the silicon content of the ferrosilicon.
Material untuk langkah ini:
Alat yang dibutuhkan:
Lumpang dan Alu3
3
Bind and press into pellets
Bind and press into pellets
Mix the powder with a binder, e.g. water glass, and press it into pellets.
Alat yang dibutuhkan:
Kaca air (larutan natrium silikat)
Pengepres Pil4
4
Reduce above 2000 °C
Reduce above 2000 °C
Heat the pellets above 2000 °C, e.g. in a Moissan arc furnace (a ferrosilicon-type resistance furnace also works). Silicon reduces the boron; the calcium silicate slag separates cleanly from the ferroboron.
Alat yang dibutuhkan:
Tanur busur listrikAlat yang Diperlukan
5- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.
