SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Flax Brake: a Double-Cleft Hand Brake in Hardwood
The brake breaks the dried woody core of retted flax into fragments and leaves the fibre whole. A hinged hardwood sword drops between thin boards set edgewise in a frame; a double cleft is handier than a single one.
The picture: a simple single-cleft brake (Лапоть, CC0).
Menengah
Two days
Instruksi
1
1
Legs and base
Legs and base
Cut two plank legs. Mortise one into a heavy hardwood block so the brake stands solid, and join the legs with two stretchers.
Material untuk langkah ini:
Papan kayu keras2 buah
Balok Kayu Keras1 buahAlat yang dibutuhkan:
Gergaji Tangan
Pahat lubang pen
Palu Kayu
Siku-siku tetap
Pensil2
2
Frame
Frame
Set three thin boards on edge between the legs, ends mortised in, leaving two even gaps. Bevel their top edges toward the front, but not sharp.
Material untuk langkah ini:
Papan kayu keras1 buahAlat yang dibutuhkan:
Gergaji Tangan
Pahat lubang pen
Palu Kayu
Ketam lengkung3
3
Sword
Sword
Shape the sword from one piece: two laths that fork over the middle board, a handle at the front. Bevel the lower edges, not sharp. Bore it and the back leg for a wooden pin.
Material untuk langkah ini:
Papan kayu keras1 buahAlat yang dibutuhkan:
Gergaji Tangan
Pisau Tarik
Ketam lengkung
Bor tanah
Kikir kasar4
4
Pin and test
Pin and test
Whittle a hardwood pin and fit the sword. Check that it drops into the gaps without bottoming out; plane the laths if it binds. Lay a dried flax bundle across and strike: roots first, then tips, then the length.
Alat yang dibutuhkan:
Pisau Tarik
Palu Kayu
Ketam lengkung5
5
Sword travel
Sword travel
Memuat notebook Jupyter…
Bahan
2- 4 buahPlaceholder
- 1 buahPlaceholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.



