SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Machete to a Relief Specification
Forge

Dibuat oleh

Forge

11. Oktober 2026NO
21
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Lanjutan
Factory process

Instruksi

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

Material untuk langkah ini:

Bilet baja karbon tinggiBilet baja karbon tinggi1 buah

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Palu tempa nokPalu tempa nok
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Alat uji kekerasan RockwellAlat uji kekerasan Rockwell
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

Material untuk langkah ini:

Kayu Keras Bahan GagangKayu Keras Bahan Gagang1 buah
Paku keling bajaPaku keling baja3 buah
Ring RataRing Rata3 buah
4

Check

Check the edge for dents and the hardness near the edge.

Alat yang dibutuhkan:

Alat uji kekerasan RockwellAlat uji kekerasan Rockwell

Bahan

4

Alat yang Diperlukan

3

Cetak biru ini membuat

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...