SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Glass Microscope Slides Cut and Edge-Ground
Bubbles

Dibuat oleh

Bubbles

14. Oktober 2026IT
9
0
0
0
0

Glass Microscope Slides Cut and Edge-Ground

A microscope slide is a thin flat strip of glass, about 75 by 25 mm and 1 mm thick, its edges ground smooth. Score thin sheet glass against a straightedge, snap it into strips and pieces, and grind the edges on a wet stone. A frosted end takes pencil for labelling. The picture: a glass slide with a frosted end for writing.
Pemula
An hour

Instruksi

1

Score and snap strips

Lay the sheet flat, score a line 25 mm from the edge with the scriber against the straightedge in one firm stroke, and snap it over the straightedge. Repeat across the sheet.

Material untuk langkah ini:

Lembaran kacaLembaran kaca1 buah

Alat yang dibutuhkan:

PenggoresPenggores
Mistar lurusMistar lurus
PenggarisPenggaris
Sarung Tangan Kerja KulitSarung Tangan Kerja Kulit
Kacamata pengamanKacamata pengaman
2

Cut to length

Score and snap each strip into 75 mm pieces.

Alat yang dibutuhkan:

PenggoresPenggores
Mistar lurusMistar lurus
PenggarisPenggaris
Sarung Tangan Kerja KulitSarung Tangan Kerja Kulit
Kacamata pengamanKacamata pengaman
3

Grind the edges

Rub every edge and corner flat on the wet stone until no sharp arris is left.

Material untuk langkah ini:

AirAir0.5 liter

Alat yang dibutuhkan:

Batu asahBatu asah
Sarung Tangan Kerja KulitSarung Tangan Kerja Kulit
4

Frost an end

Rub one end of each slide with wet emery cloth until it is evenly frosted, for writing on in pencil. Wash and dry the slides.

Alat yang dibutuhkan:

Kain emeriKain emeri
5

Slides per sheet

Memuat notebook Jupyter…

Bahan

2
  • Placeholder
  • 0.5 liter
    Placeholder

Alat yang Diperlukan

7

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...