Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Flower Holder for a Vase: Crossed Brass Strips Carrying Slit Spring Cones That Grip Each Stem (Green, 1903)
Forge

Dibuat oleh

Forge

13. November 2026NO
10
0
0
0
0

Flower Holder for a Vase: Crossed Brass Strips Carrying Slit Spring Cones That Grip Each Stem (Green, 1903)

Francis W. Green of Brooklyn received US 720,132, dated 10 February 1903, for a holder that sits on the mouth of a vase and holds each flower separately, at the height you choose. Metal strips cross at the centre and hook over the rim; small cones of sheet metal, slit at the bottom, hang in holes along the strips and grip each stem like a spring, so a bunch can be arranged "as may suit the individual taste of the user". We make it from brass. All sizes are ours.
Pemula
About 3 hours

Instruksi

1

Cone blank

Memuat notebook Jupyter…
2

Read US 720,132

"The stems of the sprays or flowers may be inserted and forced downward through the conical holder until the head of the flower or spray is at the desired position in the holder."
3

Make the frame

Cut four brass strips a little longer than your vase's mouth is wide. Drill each at its centre and rivet all four together crossed at equal angles with a short piece of brass tube flared at both ends, his hollow rivet 2. Bend the ends down to make ears that rest over the rim of the vase.

Material untuk langkah ini:

Pita kuninganPita kuningan1 buah
Tabung kuninganTabung kuningan1 buah

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Mesin Bor DudukMesin Bor Duduk
Set Mata BorSet Mata Bor
PenitikPenitik
Palu kepala bulatPalu kepala bulat
Tang Berujung RataTang Berujung Rata
Ragum MejaRagum Meja
4

Punch the holes

Drill holes along each strip, spaced so the flowers will stand apart, just big enough for a cone's narrow part to pass and its lip to rest on the strip.

Alat yang dibutuhkan:

Mesin Bor DudukMesin Bor Duduk
Set Mata BorSet Mata Bor
Set KikirSet Kikir
5

Make the cones

Mark the notebook's blank on brass sheet, cut it out, roll it round a tapered rod or nail into a cone small end down, overlap the seam and solder it. Turn the wide end out into a small lip 6. Slit the narrow end up a short way with a saw so it springs.

Material untuk langkah ini:

Lembaran KuninganLembaran Kuningan1 buah
Patri timah-timbalPatri timah-timbal1 buah
FluksFluks1 buah

Alat yang dibutuhkan:

Gunting sengGunting seng
Tang berujung bulatTang berujung bulat
Solder ListrikSolder Listrik
Gergaji PerhiasanGergaji Perhiasan
Set KikirSet Kikir
6

Fit the cones

Drop a cone into each hole and solder its lip to the strip, or make the hole a little small and press the cone in until the lip sits on the strip, as he allows.

Material untuk langkah ini:

Patri timah-timbalPatri timah-timbal1 buah
FluksFluks1 buah

Alat yang dibutuhkan:

Solder ListrikSolder Listrik
Tang Berujung RataTang Berujung Rata
7

Arrange flowers

Set the frame on the vase. Push each stem down through a cone until the flower is at the height you want: the slit end grips it. Lift a flower out and put another in without disturbing the rest.
8

Troubleshooting

Flower holder troubleshooting.

Flow

Loading...
9

History and honest limits

**Francis W. Green** of Brooklyn, US 720,132, dated 10 February 1903, filed 28 November 1902. He claimed "a frame adapted to rest over the mouth of a vase or other receptacle and provided with a number of vertically-disposed tapering spring flower-holders open at both ends". Not built: his adjustable frame ends (Fig. 6). He gives no sizes and does not limit the material: brass, all sizes and the solder are ours.

Bahan

5

Alat yang Diperlukan

12

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...