SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked
Woody

Dibuat oleh

Woody

14. Oktober 2026NO
19
0
0
0
0

Hardwood Logs: Tree Felled with Notch and Back Cut, Limbed and Bucked

Logs come from a felled tree. Cut a V-shaped notch on the side you want it to fall, then a back cut from the other side toward it; the strip left between them is the hinge that steers the fall. Then cut off the branches (limbing) and saw the trunk into logs (bucking). The picture: fallers on springboards beside a notched conifer, Clallam County, Washington, about 1905 (MOHAI 5981): the notch is the same on any tree.
Lanjutan
A day

Instruksi

1

Plan the fall

Choose a sound hardwood tree such as oak, maple or beech. Look at its lean and the wind, pick a clear line to fall it on, and clear two escape paths back and to the side.

Material untuk langkah ini:

Pohon - peluruhPohon - peluruh1 buah

Alat yang dibutuhkan:

Helm pelindungHelm pelindung
2

Cut the notch

On the side of the fall, chop a V-shaped notch about a quarter of the way into the trunk (our choice). Its back line sets the direction.

Alat yang dibutuhkan:

KapakKapak
Helm pelindungHelm pelindung
3

Back cut, leave the hinge

Saw in from the opposite side, a little above the bottom of the notch. Stop short, leaving a strip of wood uncut: the hinge. Tap a wedge into the cut to tip it. Walk away along your escape path as it goes.

Alat yang dibutuhkan:

Gergaji lintang dua orangGergaji lintang dua orang
Baji tebang kayuBaji tebang kayu
KapakKapak
Helm pelindungHelm pelindung
4

Limb it

Cut the branches off flush with the trunk, working from the base toward the top, standing on the other side of the trunk from the branch.

Alat yang dibutuhkan:

KapakKapak
Helm pelindungHelm pelindung
5

Buck into logs

Mark the lengths you need with the chalk line and saw the trunk through at each mark. Prop the trunk so the cut opens and does not pinch the saw.

Alat yang dibutuhkan:

Gergaji lintang dua orangGergaji lintang dua orang
Benang penanda berkapurBenang penanda berkapur
Baji tebang kayuBaji tebang kayu
6

How much wood is in the logs

Memuat notebook Jupyter…
7

Limits

Notch, back cut, hinge, limbing and bucking follow Wikipedia's account of tree felling; the notch depth is ours. A falling tree kills: fell only trees you are able to, with no one inside two tree-lengths.

Bahan

1

Alat yang Diperlukan

5

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...