Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Homemade Hacksaw Frame Cut from Hard Wood (Boy Mechanic, 1915)
A hacksaw frame sawn from one piece of hard wood: the blade is bolted into a slot at the handle end and tensioned at the far end by a bolt with a bent sheet-metal head whose tongue sits in a saw cut so the blade cannot twist.
Pemula
Two hours
Instruksi
1
1
Read the Boy Mechanic
Read the Boy Mechanic
"The frame is made of hard wood. The saw end is inserted in a slot sawed in the handle end, and a screw or small bolt holds it in place."
2
2
Cut the frame
Cut the frame
Saw the frame from one piece of hard wood as in the figure: a long back with a handle end (with a hand-hole) and a short far end, open between them for the blade.
Material untuk langkah ini:
Papan Kayu Keras1 buahAlat yang dibutuhkan:
Gergaji Tangan
Gergaji Coping
Bor engkol dan mata bor
Kikir (Kikir Tangan)3
3
Fix the handle end
Fix the handle end
Saw a slot in the handle end, slip one end of the blade in, and hold it with a screw or small bolt through the blade's hole.
Material untuk langkah ini:
Mata gergaji besi1 buah
Baut kepala bulat leher persegi1 buahAlat yang dibutuhkan:
Gergaji Tangan
Bor tangan4
4
Make the tension bolt
Make the tension bolt
Bend a sheet-metal head onto a bolt (A in the figure) and fix the blade's other end to it. Pass the bolt through the far end of the frame and tighten its nut to draw the blade taut. A projection of the sheet metal fits a saw cut in the frame so the blade cannot turn.
Material untuk langkah ini:
Lembaran pelat timah1 buah
Baut kepala bulat leher persegi1 buah
Mur sayap1 buahAlat yang dibutuhkan:
Gunting seng
Tang Berujung Rata
Bor tangan
Gergaji Tangan5
5
Troubleshooting
Troubleshooting
Wooden hacksaw troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 426, by W. A. Henry (checked on the archive.org scan boymechanicbook200chic2). No sizes are given; the wing nut and tools are ours.
Bahan
5- 1 buahPlaceholder
- 1 buahPlaceholder
- Placeholder
- 1 buahPlaceholder
- 1 buahPlaceholder
Alat yang Diperlukan
7- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan โ teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

