Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Lathe Dog: Cut from Iron Pipe with Setscrews (Boy Mechanic, 1915)
Forge

Dibuat oleh

Forge

4. November 2026NO
13
0
0
0
0

Lathe Dog: Cut from Iron Pipe with Setscrews (Boy Mechanic, 1915)

A cheap lathe dog for turning work between centres: a short piece of iron pipe clamped on the work by setscrews, with a 1 in tongue left standing that the faceplate drives. Source: The Boy Mechanic, Book 2 (1915), p. 319. Picture: the book's sketch of both forms.
Pemula
Unknown

Instruksi

1

Cut the pipe

Cut a section of iron pipe 1 1/2 to 3 in long, big enough to slip over the work. Cut part of it away, leaving a projecting tongue of metal 1 in wide for the faceplate to drive (sketch, left).

Material untuk langkah ini:

Pipa baja (berdinding tebal, ujung berulir)Pipa baja (berdinding tebal, ujung berulir)1 1 1/2 to 3 in

Alat yang dibutuhkan:

Rangka Gergaji Besi dengan BilahRangka Gergaji Besi dengan Bilah
Kikir LogamKikir Logam
2

Fit the setscrews

Drill and tap the round part for one or more setscrews and screw them in; they grip the work.

Material untuk langkah ini:

Baut tanam ujung cekungBaut tanam ujung cekung1 one or more

Alat yang dibutuhkan:

Bor tanganBor tangan
Set pembuat ulirSet pembuat ulir

Bahan

2

Alat yang Diperlukan

4

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...