Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Pit-Sawing Square Timber and Battens from a Log (Moxon, 1678)
How sawyers and joiners in Moxon's day ripped a log into squares, quarters and battens: lines struck with a chalked string, the log wedged over a saw-pit or on high trestles and plumbed true, and a framed pit-saw worked by a top-man and a pit-man, with wedges in the kerf to keep it open.
Menengah
A day per log (two people)
Instruksi
1
1
Setting off a scantling
Setting off a scantling
Memuat notebook Jupyter…
2
2
Read Mechanick Exercises
Read Mechanick Exercises
"If they would take any Square, Quarter, or Batten, &c. off, they first set off their Scantlin."
3
3
Set off the size
Set off the size
Open the compasses to the size you want plus the saw's kerf (e.g. 70 mm + kerf for a 70 x 70 mm square) and prick that distance from one side at both ends of the log. Set off exactly the size and the piece comes out half a kerf thinner.
Material untuk langkah ini:
Gelondong kayu lunak1 buahAlat yang dibutuhkan:
Jangka tusuk
Meteran Gulung4
4
Line the stuff
Line the stuff
Chalk a line hard, hold it on the pricks at both ends, strain it stiff, lift the middle straight up and let it snap down to leave a chalk line. Mark the underside the same way. Working alone, hook the line on a compass point or a nail at one end.
Alat yang dibutuhkan:
Benang penanda berkapur
Jangka tusuk5
5
Set up over the pit
Set up over the pit
Wedge the log fast over a saw-pit, or on two strong trestles a little more than man-high with four spreading legs. Plumb the side the lines were set from so it hangs exactly upright, or the piece will be thicker at top or bottom.
Alat yang dibutuhkan:
Baji kayu
Unting-unting6
6
Saw
Saw
Enter the pit-saw at one end: the top-man on the log guides it exactly in the line and draws it a little towards him on the down stroke; the pit-man below pulls straight down with all his strength, not so far that the handles drop out of reach. On the up stroke bear the teeth off the wood. When the sawn pieces pinch the blade, drive a wedge into the kerf, as far as you dare without splitting it.
Alat yang dibutuhkan:
Gergaji lubang (gergaji dua orang)
Baji kayu
Palu Kayu7
7
Square and batten
Square and batten
Turn the log and line and saw the other faces the same way to get squares (70 x 70 mm here) and thinner battens.
Alat yang dibutuhkan:
Gergaji lubang (gergaji dua orang)
Benang penanda berkapur
Jangka tusuk8
8
Troubleshooting
Troubleshooting
Pit-sawing troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From Joseph Moxon, **Mechanick Exercises**, Numb. V, Joinery (1678), §27, pp. 96-98, and Plate 4 M (checked on the archive.org scan mechanickexercis00moxo). Softwood, the 70 mm size and the kerf figure are ours.
Bahan
1- 1 buahPlaceholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

