Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Oven: Insulated Electric Oven with Plug-In Grid Heaters and a Thermostat (Ogden, US 987,161, 1911)
An electric oven built to waste as little heat as possible: a double-walled, packed box with a packed door that seals like a strong-room door. Grid-shaped heating elements slide into grooves in the walls and plug into sockets at the back, and the food rests on them. A thermostat cuts the current when the set temperature is reached and switches it on again as the oven cools.
Result: an oven that bakes, roasts or dries at a set temperature with any number of heating grids.
Source: G. J. Ogden, US 987,161 (1911). Unknown: sizes, metals, packing and temperatures. Picture: the patent drawing.
Lanjutan
Unknown
Instruksi
1
1
Build the insulated casing and door
Build the insulated casing and door
Make the oven chamber as a double-walled casing with packing between the walls, and grooves on the inner side walls to take the heating grids. Fit a door that closes like a fire-proof vault door, also packed, so the casing seals closely. Ours: mild steel sheet. Not given: sizes, the packing.
Material untuk langkah ini:
Pelat Baja Lunak1 inner and outer walls, door
Bahan isolasi tidak diketahui1 packingAlat yang dibutuhkan:
Gunting seng
Mesin Bor Duduk
Dimensi tidak diketahui2
2
Make the plug-in heating grids
Make the plug-in heating grids
Make heating elements in the form of grids that slide into the grooves and on which the food can rest. Fix a porcelain plug to each, carrying spring fingers that push into a socket with matching spring fingers in the back wall. Wire the sockets so all the elements are in parallel; use as many as the temperature and amount of food need. Ours: nichrome wire. Not given: the element type.
Material untuk langkah ini:
Kawat nikrom1 heating grids
Bahan tidak diketahui1 porcelain plugs and sockets
Kawat baja pegas1 spring fingers
Kawat hubung1 circuit wiringAlat yang dibutuhkan:
Solder3
3
Fit the thermostat control
Fit the thermostat control
Put a thermostat that bends with heat inside the oven, working a contact finger that plays between two contacts a few degrees above and below the set temperature. A switch-changing device, a small rotary motor, throws the main switch off and on as the finger touches one contact or the other. Mount a setting arm with a pointer over a scale marked in degrees, and a second pointer driven by the thermostat. Add a hand switch to turn the current on or off independently, and a lamp with its own switch to light the oven. Ours: a bimetal strip, toggle switches. Not given: temperatures.
Material untuk langkah ini:
Bilah bimetal1 thermostat
Motor listrik1 switch-changing motor
Sakelar tuas3 main, hand and lamp switches
Logam tidak diketahui1 contacts, arm, scale
Bahan tidak diketahui1 incandescent oven lampAlat yang dibutuhkan:
Solder
TermometerBahan
10- 1 inner and outer walls, doorPlaceholder
- 1 packingPlaceholder
- 1 heating gridsPlaceholder
- 1 incandescent oven lampPlaceholder
- 1 spring fingersPlaceholder
- Placeholder
- 1 thermostatPlaceholder
- 1 switch-changing motorPlaceholder
- Placeholder
- 1 contacts, arm, scalePlaceholder
Alat yang Diperlukan
5- Placeholder
- Placeholder
- Placeholder
- 2 vendors sell this, none ship to you yetPlaceholder
- Placeholder
Bahan cetak biru terhubung
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

