SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Partition Air-Tube Plunger Churn: Cream Rushing Through Branch Tubes Draws Air Down
Emma

Dibuat oleh

Emma

6. Oktober 2026SE
5
0
0
0
0

Partition Air-Tube Plunger Churn: Cream Rushing Through Branch Tubes Draws Air Down

O'Neil used the rush of the cream itself to draw air into it. John O'Neil of Xenia, Ohio, received US 7,531, dated 30 July 1850, for an atmospheric churn: a box divided by a movable partition with its lower edge perforated; an air tube down the partition with a bowl at its top, in the lid, holding a spring-closed hinged valve; a horizontal tube at its foot and branch tubes through the partition's lower edge, which "serve the double purpose of breaking the cream as it passes through and of communicating the current of atmosphere to the opposite apartment." Two plungers on a rocking lever, one cut to pass over the air tube, work oppositely. This rung estimates the suction, then prints the partition with its tubes, the valve bowl and the plungers, builds the box and lever, and makes butter.
Lanjutan
About 5 hours, plus printing

Instruksi

1

The suction

Memuat notebook Jupyter…
2

Two plungers forcing cream through holes before it

The embedded blueprint throws cream between three chambers. O'Neil uses two, and lets the cream's rush through branch tubes draw air down an air tube.
3

Read US 7,531

"The depression of one, and the same time the elevation of the other causes the cream to be violently rushed through the horizontal tubes d, d, and the holes in the partition from one apartment to the other alternately. The passage of the cream through the tubes d, d, causes a suction of the atmosphere down the pipe b, through the horizontal part of the tube c, to d, d, and thence to the body of cream in each apartment."
4

Print the parts

Print the partition with its air tube, foot tube and branches in one piece (/uploads/blueprints/partition-air-tube-plunger-churn-partition-and-tubes.stl), with supports. Blow through the tube's top to check air comes out of both branches. Print the valve bowl (/uploads/blueprints/partition-air-tube-plunger-churn-valve-bowl.stl), one plunger (/uploads/blueprints/partition-air-tube-plunger-churn-plunger.stl) and one notched plunger (/uploads/blueprints/partition-air-tube-plunger-churn-notched-plunger.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Material untuk langkah ini:

Filamen PETGFilamen PETG1 buah

Alat yang dibutuhkan:

Pencetak 3D filamen (FDM)Pencetak 3D filamen (FDM)
5

Box, partition and valve

Take a food-safe box about 220 × 120 × 180 mm and fit two plywood strips inside the long sides at the middle as grooves, so the partition slides in and out. Drill the lid over the air tube's top and seat the bowl's spigot onto the tube through it. Hinge a small leather flap on the bowl's seat with a light spring, as his, so air passes down but cream cannot rise.

Material untuk langkah ini:

Wadah penyimpanan mutu panganWadah penyimpanan mutu pangan1 buah
Lembaran kayu lapisLembaran kayu lapis1 buah
Jalur kulitJalur kulit1 buah
Sealant SilikonSealant Silikon1 buah

Alat yang dibutuhkan:

Gergaji CopingGergaji Coping
Bor Tanpa KabelBor Tanpa Kabel
Set Mata BorSet Mata Bor
6

Plungers and lever

Glue a 12 mm hardwood dowel rod in each plunger, the notched one on the side of the air tube. Screw a pine standard to each side of the box at the middle, pass a dowel axle through them and a pine lever, and join each rod to the lever on a loose screw.

Material untuk langkah ini:

Pasak kayu kerasPasak kayu keras1 buah
Papan pinusPapan pinus1 buah
Sekrup mesinSekrup mesin1 buah
Mur Segi EnamMur Segi Enam1 buah
Lem KayuLem Kayu1 buah
Sekrup kayu #8 x 1"Sekrup kayu #8 x 1"1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Bor Tanpa KabelBor Tanpa Kabel
Set Mata BorSet Mata Bor
Set obengSet obeng
7

The patent drawing

US 7,531 drawing sheet, public domain (expired patent).
Langkah 7 - Image 1
8

Rock and make butter

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Rock the lever briskly; bubbles should come from the branch tubes. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Material untuk langkah ini:

Krim kentalKrim kental1500 ml
Garam Laut KasarGaram Laut Kasar1 buah
AirAir1 buah

Alat yang dibutuhkan:

Termometer probe tinggal-pasangTermometer probe tinggal-pasang
StopwatchStopwatch
Timbangan Dapur DigitalTimbangan Dapur Digital
Mangkuk aduk baja nirkarat (besar)Mangkuk aduk baja nirkarat (besar)
9

No air, cream in the bowl

Partition air-tube churn troubleshooting.

Flow

Loading...
10

History and honest limits

**John O'Neil** of Xenia, Greene County, Ohio, received US 7,531, dated 30 July 1850. His plungers had parts of two sides cut away, leaving about 1½ inches at each corner, "for the purpose of gathering the butter above the dasher." He claimed the construction of the air tubes in combination with the plungers and partition. **Honest limits.** Printed parts and a food-safe box stand in for his; the notebook's pressure drop is a rough estimate. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

Bahan

14

Alat yang Diperlukan

10

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...