Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)
Woody

Dibuat oleh

Woody

14. November 2026NO
7
0
0
0
0

Quick-Acting Hardwood Bench Vise with Cam and Drop Roll (Boy Mechanic, 1919)

A home-made bench vise entirely of hard wood: the front jaw slides in and out on arm C, a loose roll A drops into place to lock it, a cam lever in front gives the final squeeze, and the pivoted jaw B tilts to grip work whose sides are not parallel.
Menengah
A day

Instruksi

1

Sizes in mm

Memuat notebook Jupyter…
2

Read the Boy Mechanic

"A detail is given of each part, with dimensions, so that it is not difficult to make it from hard wood."
3

Cut the parts to the drawing

Cut every part from hard wood to the sizes in the drawing: the 6-1/2 x 7-3/8 x 3/4 in plate with its 2-5/16 x 2-7/16 in opening, the 6-1/2 x 4 x 1 in slotted plate, the 5 x 5-1/2 x 1/2 in plate, the blocks, the forked piece, the long bar drawn at the bottom (2 x 1-3/8 in; we take it to be arm C) and the cam lever (5-1/2 in between centres, 5/16 in pin hole; its edge view is drawn 5/8 in).

Material untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Gergaji CopingGergaji Coping
Pahat kayuPahat kayu
Bor engkol dan mata borBor engkol dan mata bor
4

Turn roll A

Make roll A, a round hardwood roll 1-1/16 in across and 1-7/8 in long.

Material untuk langkah ini:

Pasak kayu kerasPasak kayu keras1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
5

Assemble under the bench

Fit the parts under the bench top as the section view shows: arm C slides through the fixed part, roll A sits in its curved seat behind the jaw so it can drop and wedge the arm, jaw B is pivoted so it swings loose, and the cam lever is pinned at the front. Screw and bolt the fixed parts to the bench.

Material untuk langkah ini:

Sekrup kayuSekrup kayu1 buah
Baut kepala bulat leher persegiBaut kepala bulat leher persegi1 buah

Alat yang dibutuhkan:

Bor engkol dan mata borBor engkol dan mata bor
PaluPalu
6

Use it

To open: turn the cam, then lift the front of the vise to free roll A, and slide the front jaw out to the size of the work. Put the work in: roll A drops into place and clamps arm C. Turn the cam to tighten.
7

Troubleshooting

Wooden vise troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 3** (Popular Mechanics, 1919), p. 85, by J. C. Hansen (checked on the archive.org scan boymechanic0003unse). The text names only roll A, jaw B, arm C and the cam; build the other pieces as drawn. Metric figures are ours.

Bahan

4

Alat yang Diperlukan

5

Cetak biru ini membuat

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...