Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Expanding Book Support: Lazy-Tongs Between Two End Pieces, Locked by a Thumb-Nut (Roseboom, 1901)
Forge

Dibuat oleh

Forge

13. November 2026NO
6
0
0
0
0

Expanding Book Support: Lazy-Tongs Between Two End Pieces, Locked by a Thumb-Nut (Roseboom, 1901)

Jesse Roseboom of Cincinnati received US 668,961, dated 26 February 1901, for a book support that fills any gap on a shelf. Two end pieces are joined by a lazy-tongs; set it between the books and the shelf's side, open it until the books stand up firmly, and tighten a thumb-nut on the centre bolt, where two roughened disks lock the levers. We make it from hardwood and flat bar. All sizes are ours.
Pemula
About 3 hours

Instruksi

1

How far it opens

Memuat notebook Jupyter…
2

Read US 668,961

"It is placed between two sets of books on a shelf or the like or between a row of books and an upright of the shelf, and the connection B is then expanded, so as to press the end pieces against the upright and the adjacent book, after which the connection is adjustably fixed."
3

Make the end pieces

Cut two hardwood end pieces about as tall as your books' lower half (ours), his end pieces A, and sand them. Screw a small butt hinge to the middle of each inner face, his hinge-plates E, with the knuckle upright.

Material untuk langkah ini:

Papan Kayu KerasPapan Kayu Keras1 buah
Engsel daunEngsel daun2 buah
Sekrup kayuSekrup kayu1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
AmplasAmplas
Set obengSet obeng
4

Make the levers

Cut two long levers C and four short levers D of flat bar, round the ends and drill them at the notebook's centres. Drill the long levers at their middles for the bolt. File two washers rough on one face and fix one to each long lever round its centre hole, his corrugated disks H.

Material untuk langkah ini:

Besi Strip Baja LunakBesi Strip Baja Lunak1 buah
Ring RataRing Rata1 buah

Alat yang dibutuhkan:

Gergaji BesiGergaji Besi
Set KikirSet Kikir
Mesin Bor DudukMesin Bor Duduk
Set Mata BorSet Mata Bor
Ragum MejaRagum Meja
5

Assemble the lazy-tongs

Bolt the long levers together at their centres with the rough faces meeting and a wing nut on the bolt, his bolt F and thumb-nut G. Rivet a short lever to each arm end of the long levers, loosely so they turn, and rivet the other ends of each pair to the free leaf of an end piece's hinge. The long levers' ends should bear on the end pieces and keep them upright.

Material untuk langkah ini:

Sekrup Kepala SoketSekrup Kepala Soket1 buah
Mur sayapMur sayap1 buah
Paku keling bajaPaku keling baja1 buah

Alat yang dibutuhkan:

Palu kepala bulatPalu kepala bulat
PenitikPenitik
Kunci InggrisKunci Inggris
6

Use it

Set it in the gap on the shelf, open it until both end pieces press the books and the shelf's side, and tighten the wing nut. Loosen the nut to close it up and move it.
7

Troubleshooting

Book support troubleshooting.

Flow

Loading...
8

History and honest limits

**Jesse Roseboom** of Cincinnati, US 668,961, dated 26 February 1901, filed 7 August 1900. He claimed "a book-support for use on shelves and the like, comprising end pieces, and the long and short levers interposed between the end pieces; the long levers being pivotally connected together, and the short levers being pivotally connected to the arms of the long levers, and to the end pieces", and the roughened meeting faces with bolt and nut. He gives no sizes; the hardwood, flat bar, hinges as his hinge-plates, rivets and all sizes are ours.

Bahan

8

Alat yang Diperlukan

11

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...