SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Round-Bottom and Florence Flasks Blown from Glass Tube
Bubbles

Dibuat oleh

Bubbles

14. Oktober 2026IT
23
0
0
0
0

Round-Bottom and Florence Flasks Blown from Glass Tube

A round-bottom flask is a glass sphere on a tubular neck: the round shape heats evenly and stands up to vacuum, so it is the flask for boiling and distilling. Blow it from the end of a borosilicate tube; flatten the bottom while soft and it becomes a Florence flask that stands on the bench. The picture: our diagram of the steps, from tube to round-bottom and Florence flask.
Lanjutan
An hour per flask, plus annealing

Instruksi

1

Close and gather

Close one end of the tube in the flame as for a test tube. Keep heating and turning the closed end, pushing gently, so glass gathers into a thick knob for the bulb.

Material untuk langkah ini:

Set Tabung KacaSet Tabung Kaca1 buah

Alat yang dibutuhkan:

Obor peniup kaca mejaObor peniup kaca meja
Kacamata pengamanKacamata pengaman
Sarung Tangan Tahan PanasSarung Tangan Tahan Panas
2

Blow the bulb

Take the gather out of the flame and blow gently into the open end while turning, so the bulb grows round. Reheat and blow again until it is the size you want.

Alat yang dibutuhkan:

Obor peniup kaca mejaObor peniup kaca meja
Jangka Sorong Digital 6 InciJangka Sorong Digital 6 Inci
Kacamata pengamanKacamata pengaman
3

Flat bottom for a Florence flask

For a flask that stands, soften the bottom of the bulb and press it gently on a flat plate.

Alat yang dibutuhkan:

Obor peniup kaca mejaObor peniup kaca meja
Sarung Tangan Tahan PanasSarung Tangan Tahan Panas
4

Cut and finish the neck

Score and snap the tube to neck length, fire the edge smooth and flare it a little with the jacks so a stopper or joint fits.

Alat yang dibutuhkan:

Penggores IntanPenggores Intan
Obor peniup kaca mejaObor peniup kaca meja
Jacks (tang tukang kaca)Jacks (tang tukang kaca)
5

Anneal and check

Anneal in the kiln at the glass's annealing temperature and cool slowly. Fill with measured water to find and mark the volume. Stand round flasks in a cork ring.

Material untuk langkah ini:

AirAir1 liter

Alat yang dibutuhkan:

Tungku PembakaranTungku Pembakaran
Gelas ukur silinderGelas ukur silinder
Penggores IntanPenggores Intan
6

Bulb size for a volume

Memuat notebook Jupyter…
7

Limits

The flask's form and why it is round are from Wikipedia; the blowing is our lampwork practice. Heat only borosilicate flasks, and never boil in a flask with a scratched or unannealed wall.

Bahan

2
  • Placeholder
  • 1 liter
    Placeholder

Alat yang Diperlukan

8

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...