SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Rubber Hose: Braided, Spirally Wrapped and Vulcanized in Long Lengths
Henry Cobb's wrapped hose (Revere Rubber, US 1,230,867, 1917). A rubber tube is forced through a ring die, braided over while held open by pressure, wrapped by machine with a helical strip of frictioned fabric overlapping half its width, covered in rubber and vulcanized. Wrapping by machine instead of rolling bias-cut fabric by hand lets the hose run 500 ft or more, and Cobb says it stands nearly twice the bursting pressure.
The patent gives no sizes, recipes or cure times. Couplings are not part of it: an air hose is this hose with couplings fitted. The picture: the patent's sheet 1.
Lanjutan
1 day
Instruksi
1
1
Force the inner tube
Force the inner tube
Force vulcanizable rubber compound through the ring-shaped gap between the two parts of a tube die to make the inner tube (1).
Material untuk langkah ini:
Kompon karet1 batchAlat yang dibutuhkan:
Cetakan ekstrusi pipa2
2
Braid over the tube
Braid over the tube
Run the tube through a braiding machine that lays crossing helical strands over it (2), coating the strands with rubber compound as they braid. Keep the tube under air pressure so it does not collapse. Ours: the air from a compressor. The braid may be left out, but it holds the hose to size.
Material untuk langkah ini:
Benang1 batchKompon karet1 batchAlat yang dibutuhkan:
Mesin kepang
Kompresor udara3
3
Cut the fabric along the warp
Cut the fabric along the warp
Cut frictioned fabric into a long strip lengthwise, along the warp threads; wound helically, both warp and weft then run round the hose as if cut on the bias.
Material untuk langkah ini:
Kain friksi karet1 gulungAlat yang dibutuhkan:
Pisau kater4
4
Wrap the strip half over
Wrap the strip half over
Feed the braided tube through the wrapping machine, which winds the strip (3) round it under tension, each turn over half the last: two plies, the whole length without stopping. For four plies wind a second strip (5) over the first, in the same pass or a second.
Alat yang dibutuhkan:
Mesin pembalut selang5
5
Plies from the overlap
Plies from the overlap
Memuat notebook Jupyter…
6
6
Cover and vulcanize
Cover and vulcanize
Apply a layer of rubber compound (4) over the last winding for a smooth, protected outside. Vulcanize the hose for its whole length in a mould or otherwise.
Material untuk langkah ini:
Kompon karet1 batchAlat yang dibutuhkan:
Cetakan vulkanisasiBahan
3- 1 batchPlaceholder
- 1 batchPlaceholder
- 1 gulungPlaceholder
Alat yang Diperlukan
6- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.