SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Heil and Esch · Public domain (1909)
Rubber Stoppers: Pará Rubber with Ceresine, Moulded and Cured (Heil & Esch 1909)
Laboratory rubber stoppers from a 1909 rubber factory's book of mixings: Pará rubber with ceresine wax, sulphur and magnesia, run out as a cord, cut to weight, pressed into moulds and cured.
Source: Heil & Esch, The Manufacture of Rubber Goods (1909), mixing No. 34 (p. 108) and the stopper method (p. 135). They give no cure time or temperature. Using smoked ball rubber as their Pará, and the mill, clamps and steam vessel, are ours. Picture: their page of mixings.
Menengah
1 day
Instruksi
1
1
Weigh mixing No. 34
Weigh mixing No. 34
Weigh out 10,000 g Pará rubber, 2,000 g ceresine, 1,000 g sulphur and 100 g calcined magnesia (magnesia usta).
Material untuk langkah ini:
Bola karet asap10000 g
Lilin seresin2000 g
Serbuk belerang1000 g
Magnesium oksida100 gAlat yang dibutuhkan:
Neraca lengan2
2
Mix on the rolls
Mix on the rolls
Work the rubber on the mixing rolls and work the ceresine, sulphur and magnesia into it until the mixing is even.
Alat yang dibutuhkan:
Gilingan karet dua rol3
3
Run a cord on the tube machine
Run a cord on the tube machine
Run the mixing through the tube machine as a cord of a size to suit the stoppers. It must be free from air bubbles, or the stoppers will be faulty after curing.
Alat yang dibutuhkan:
Mesin pipa karet4
4
Cut pieces to weight
Cut pieces to weight
Cut the cord into pieces of the exact weight of one stopper plus 2 or 3 per cent, for what squeezes out of the mould.
Alat yang dibutuhkan:
Pisau KerajinanNeraca lengan5
5
Press into moulds and clamp
Press into moulds and clamp
Press each piece into a mould and clamp the small moulds very tightly in iron clips.
Alat yang dibutuhkan:
Cetakan vulkanisasi
Klem C6
6
Cure in steam
Cure in steam
Cure the clamped moulds in a steam heater (Heil & Esch also name the sulphur bath). They give no time or temperature for stoppers; then open the moulds and take out the stoppers.
Alat yang dibutuhkan:
Otoklaf mejaCetakan vulkanisasiBahan
4- 10000 gPlaceholder
- 2000 gPlaceholder
- 1000 gPlaceholder
- 100 gPlaceholder
Alat yang Diperlukan
7- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.