SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered
Forge

Dibuat oleh

Forge

18. Oktober 2026NO
20
0
0
0
0

Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered

Needles are made from good steel wire: cut, straightened, pointed, flattened and pierced for the eye, hardened by heating and plunging into oil, then tempered back to a springy hardness, scoured and polished (Bucknall Smith, A Treatise upon Wire, 1891). This is the same sequence by hand, one heavy needle at a time from piano wire; the hand methods and sizes are ours. The picture: steel sewing needles (Wikimedia Commons).
Menengah
Half a day

Instruksi

1

Cut, soften and straighten

Cut 70 mm of 1.2 mm piano wire. Heat it to red in the forge and let it cool slowly in the ashes so it can be filed and drilled, then roll it straight on the anvil.

Material untuk langkah ini:

Kawat pianoKawat piano70 mm

Alat yang dibutuhkan:

Tang potongTang potong
Perapian pandai besiPerapian pandai besi
Tang lancipTang lancip
Landasan TempaLandasan Tempa
2

Point

Clamp it in the vise and file a long, even taper to a sharp point, turning the wire as you go.

Alat yang dibutuhkan:

Set KikirSet Kikir
Ragum MejaRagum Meja
Kacamata pengamanKacamata pengaman
3

Flatten and pierce the eye

Flatten the head end slightly on the anvil, drill the eye through the flat with the finest bit, then file off the burrs and round the head.

Alat yang dibutuhkan:

Landasan TempaLandasan Tempa
Palu kepala baji melintangPalu kepala baji melintang
Bor tanganBor tangan
Set KikirSet Kikir
Ragum MejaRagum Meja
Kacamata pengamanKacamata pengaman
4

Harden in oil

Heat the needle evenly to red and plunge it into the oil. It is now glass-hard and brittle.

Alat yang dibutuhkan:

Perapian pandai besiPerapian pandai besi
Tang lancipTang lancip
Bak celup minyakBak celup minyak
Kacamata pengamanKacamata pengaman
5

Temper

Reheat it in the oven to about 600 °F (315 °C) and let it cool slowly to a springy temper. If it came out crooked, straighten it with light blows of a small hammer on the anvil.

Alat yang dibutuhkan:

Oven perlakuan panasOven perlakuan panas
Termokopel dengan penampilTermokopel dengan penampil
Landasan TempaLandasan Tempa
Palu kepala baji melintangPalu kepala baji melintang
6

Scour and polish

Scour it bright with emery cloth, a little oil and soap. Wash it in hot water, dry it in sawdust, touch up the point, and polish it on the leather strop.

Alat yang dibutuhkan:

Kain emeriKain emeri
Minyak zaitunMinyak zaitun
SabunSabun
Serbuk gergajiSerbuk gergaji
Strop kulitStrop kulit
Set KikirSet Kikir

Bahan

1
  • Placeholder

Alat yang Diperlukan

17

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...