SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Stick Shuttle Cut from a Beech Strip
The shuttle carries the weft yarn through the shed of the loom. The simplest is the stick shuttle: a flat, narrow piece of hard wood with notches at the ends to hold the wound weft. Saw a thin beech strip a little longer than the cloth is wide, cut forked notches at both ends, round every edge and polish it smooth so it slides.
The picture: two stick shuttles wound with yarn.
Pemula
An afternoon
Instruksi
1
1
Cut the strip
Cut the strip
Saw and plane a straight-grained beech strip about 6 mm thick and 4 cm wide, a little longer than the cloth is wide (step 5).
Material untuk langkah ini:
Kayu beech1 buahAlat yang dibutuhkan:
Gergaji Tangan
Ketam tangan
Penggaris2
2
Cut the notches
Cut the notches
Drill a hole near each end and saw from the end into it, making a forked notch that holds the yarn. Cut a shallow long slot in the middle if you like, to make the shuttle lighter.
Alat yang dibutuhkan:
Bor tangan
Gergaji Coping3
3
Round and smooth
Round and smooth
Round all the edges and points with the knife and rasp so nothing can catch the warp, then sand it smooth.
Alat yang dibutuhkan:
Pisau Ukir Sloyd
Kikir kasar kayu
Amplas4
4
Wax it
Wax it
Rub in beeswax and polish so the shuttle slides through the shed.
Material untuk langkah ini:
Malam Lebah0.01 kgAlat yang dibutuhkan:
Amplas5
5
Shuttle length for the cloth
Shuttle length for the cloth
Memuat notebook Jupyter…
Bahan
2- 1 buahPlaceholder
- 0.01 kgPlaceholder
Alat yang Diperlukan
8- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

