Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Stop-Out Varnish: Turpentine and Resin with Lampblack (Spon's Workshop Receipts)
The etcher's stopping-out varnish from Spon's Workshop Receipts: resin dissolved in spirits of turpentine in a warm water bath, coloured with a little lampblack, and brushed over the parts of the plate that must not bite further.
Spon rates it better than Brunswick black; it sets hard overnight and can be thinned again with turpentine.
Source: E. Spon, Workshop Receipts (first series), pp. 155-156. Picture: the book's text.
Pemula
Overnight to set
Instruksi
1
1
Dissolve the resin
Dissolve the resin
Break small pieces of resin into a phial and pour spirits of turpentine over to about twice the height of the resin. Stand the bottle in a small saucepan of water kept hot on the hob, with a cork laid lightly in its mouth, and shake it now and then.
Material untuk langkah ini:
Getah Pinus1 small pieces
Terpentin1 to twice the height of the resinAlat yang dibutuhkan:
Botol kaca (bening)
Panci berdinding tinggi
Air2
2
Colour with lampblack
Colour with lampblack
Pour a small portion into a small pot, add a little lampblack to give it colour, and work it well together with the camel-hair pencil so there are no lumps.
Material untuk langkah ini:
Jelaga lampu1 a littleAlat yang dibutuhkan:
Kuas halus3
3
Apply and set
Apply and set
Brush it over the parts to be stopped out, or over the margin of the plate; left a night it sets hard. It is dry when a finger can be laid on it without sticking. Thin it again with a little turpentine.
Alat yang dibutuhkan:
Kuas halusTerpentinBahan
3- 1 small piecesPlaceholder
- 1 to twice the height of the resinPlaceholder
- 1 a littlePlaceholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.