SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Stopwatch: Lugrin, 1876
Penny

Dibuat oleh

Penny

12. Oktober 2026DK
20
0
0
0
0

Stopwatch: Lugrin, 1876

Henri Alfred Lugrin of New York patented this timing watch in 1876, US 176,231. Instead of placing the timing hand on the face, where it needs more gearing, he put the timing hand and its own dial on top of the watch movement. The hand is geared to the watch's second wheel through a pinion and wheel, and sits on its post by a tube and friction spring, so it can be stopped while the watch runs on. A heart-shaped cam and lever return it to the start, and the same lever also returns a minute hand on a small sectional dial beside it. A stop lever holds the timing hand. Lugrin's hand moves in fifths of a second but he calls it the quarter-second hand.
Lanjutan
Watchmaker's work

Instruksi

1

Timing hand and dial

Mount the timing hand and its dial on top of the watch movement, the hand on a short centre post.

Material untuk langkah ini:

Mesin arlojiMesin arloji1 buah
Jarum dan piringan pengukur waktuJarum dan piringan pengukur waktu1 buah

Alat yang dibutuhkan:

Set pinset presisiSet pinset presisi
Set obengSet obeng
2

Gear it to the movement

Gear the post to the second wheel of the watch train through a pinion and wheel.

Material untuk langkah ini:

Pinion dan roda rangkaian pengukur waktuPinion dan roda rangkaian pengukur waktu1 buah

Alat yang dibutuhkan:

Set pinset presisiSet pinset presisi
Set obengSet obeng
3

Friction connection

Connect the hand to its post by a tube and friction spring, so the hand can be stopped without stopping the movement.

Material untuk langkah ini:

Pegas dan tabung gesekPegas dan tabung gesek1 buah

Alat yang dibutuhkan:

Set pinset presisiSet pinset presisi
4

Minute recorder

Place the minute hand and its sectional dial at one side of the timing hand, on a post geared with the barrel wheel, connected by the same kind of tube and friction spring.

Material untuk langkah ini:

Jarum dan piringan penghitung menitJarum dan piringan penghitung menit1 buah

Alat yang dibutuhkan:

Set pinset presisiSet pinset presisi
Set obengSet obeng
5

Return and stop

Fit the heart-shaped cams and the return lever, extended so one lever returns both hands to the start at once, and fit the stop lever.

Material untuk langkah ini:

Cam jantung dan tuas pengembaliCam jantung dan tuas pengembali1 buah
Tuas penghentiTuas penghenti1 buah

Alat yang dibutuhkan:

Set pinset presisiSet pinset presisi
Set obengSet obeng

Bahan

7

Alat yang Diperlukan

2

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...