SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
MASA DEPAN HIJAU
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Crafting a Self Bow and Arrows from Raw Wood
Build a self bow and matched arrows from raw wood. A properly tillered bow launches arrows effectively at 15-25 meters. Links to cordage and flint knapping blueprints.
Advanced
2-3 days (multiple sessions)
Instructions
1
1
Select Stave
Select Stave
Straight hardwood: yew, ash, elm, or hickory. 150-170cm (ground to chin). Must be dry. The back (target side) = one continuous growth ring, never cut across grain. Avoid: pine, spruce (too soft).
2
2
Shape & Nock
Shape & Nock
Mark 10cm handle at center. Taper limbs from handle to tips. D-shaped cross-section: flat back, rounded belly. Cut shallow string nocks at each tip.
Design
Cross-section diagram of bow stave showing flat back, rounded belly, taper profile
3
3
Tiller
Tiller
String loosely, pull a few cm. Both limbs must bend evenly. Shave belly where stiff — tiny amounts only. Gradually increase draw. Target: 15-25kg draw weight.
4
4
Bowstring
Bowstring
Reverse-wrap cord from strong plant fibers (see cordage blueprint). Wax with beeswax. 15cm shorter than bow for proper tension.
5
5
Arrow Shafts
Arrow Shafts
Straight shoots (dogwood, willow), 70-80cm, 8-10mm diameter. Peel, dry, straighten over coals. Cut nock at one end.
6
6
Fletch & Point
Fletch & Point
3 split feathers per arrow, 10-12cm long, bound with sinew and pine pitch. Points: knapped flint, hardwood, or fire-hardened tips. Balance point 10-15% forward of center.
Materials
- •Hardwood stave (150-170cm) - 1 piecePlaceholder
- •Arrow shoots - 6 piecessPlaceholder
- •Feathers - 6 featherssPlaceholder
- •Strong cordage - 2 meterssPlaceholder
- •Pine pitch glue - 1 stickPlaceholder
CC0 Public Domain
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Maker Commission yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.