SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Teaspoon Forged from a Silver Bar (Payne 1914)
Arthur F. Payne · Public domain (1914)
Forge

Dibuat oleh

Forge

27. Oktober 2026NO
13
0
0
0
0

Teaspoon Forged from a Silver Bar (Payne 1914)

A 6-inch silver teaspoon forged out of a small bar of silver, the way a blacksmith forges iron. Arthur Payne called it the hardest of his five spoon methods, but the cheapest, because almost no silver is wasted. Source: A. F. Payne, Art Metalwork with Inexpensive Equipment (1914), pp. 184–186; annealing from his chapter XI. Cutting the bar from sheet is ours. Picture: Payne's Fig. 158, teaspoons forged this way.
Lanjutan
1 day

Instruksi

1

Cut the silver bar

For a teaspoon 6 in long you need a piece of sterling silver 4 in long, ½ in wide and ⅛ in thick. Mark it out and saw it from sheet of that thickness (cutting from sheet is ours).

Material untuk langkah ini:

Pelat perak sterlingPelat perak sterling1 piece 4 × ½ × ⅛ in

Alat yang dibutuhkan:

PenggoresPenggores
Gergaji PerhiasanGergaji Perhiasan
2

Forge out the bowl

Heat the bar until it is almost red-hot, hold it in tongs and forge the bowl out on the anvil. Silver forges more easily when it is nearly red, but never hammer it while it is red-hot: it will crack.

Alat yang dibutuhkan:

Pembakar BunsenPembakar Bunsen
PenjepitPenjepit
Landasan TempaLandasan Tempa
PaluPalu
3

Work bowl, then shank and handle

Hammer the bowl until it is hard, then the shank and handle, so the whole spoon is hard before you anneal it again. That saves time.

Alat yang dibutuhkan:

Landasan TempaLandasan Tempa
PaluPalu
4

Anneal and repeat

To soften it, heat it to a dull red and plunge it into water, or let it cool. Then go on forging until the spoon is roughly to shape.

Material untuk langkah ini:

AirAir1 as required

Alat yang dibutuhkan:

Pembakar BunsenPembakar Bunsen
PenjepitPenjepit
Wadah kacaWadah kaca
5

Trim with shears and file

Trim the outline with the shears and file the edges smooth.

Alat yang dibutuhkan:

Gunting logam beratGunting logam berat
Kikir (Kikir Tangan)Kikir (Kikir Tangan)
6

Polish out the file marks

Rub out all the scratches and file marks with emery cloth.

Alat yang dibutuhkan:

Kain emeriKain emeri
7

Anneal to even the fire scale

Anneal the spoon thoroughly once more. Heated silver grows a thin white skin, the fire scale, and this brings it back over the spots where filing and polishing took it off, so the colour is even.

Material untuk langkah ini:

AirAir1 as required

Alat yang dibutuhkan:

Pembakar BunsenPembakar Bunsen
PenjepitPenjepit
Wadah kacaWadah kaca
8

Planish with smooth hammers

Planish the spoon on smooth tools with smooth, bright hammers. This makes it stiff again after the annealing.

Alat yang dibutuhkan:

Palu perataPalu perata
Landasan TempaLandasan Tempa
PasakPasak
9

Final polish with rouge

Polish it lightly with a soft cotton flannel and a little red rouge.

Alat yang dibutuhkan:

Kain pemoles perhiasanKain pemoles perhiasan
Merah poles perhiasanMerah poles perhiasan

Bahan

2
  • 1 piece 4 × ½ × ⅛ in
    Placeholder
  • 2 as required
    Placeholder

Alat yang Diperlukan

14

Cetak biru ini membuat

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...