Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Hand Files Cut With a Double-Edged Hammer and Tempered in Burnt Ox Horn and Salt (Theophilus, 12th Century)
Forge

Dibuat oleh

Forge

14. November 2026NO
10
0
0
0
0

Hand Files Cut With a Double-Edged Hammer and Tempered in Burnt Ox Horn and Salt (Theophilus, 12th Century)

How a medieval metalworker made his own files, from Theophilus's De Diversis Artibus (12th century): files of steel, or of soft iron faced with steel, forged to size, smoothed and cut with a double-edged hammer or cutting iron, then hardened by sprinkling them glowing with burnt ox horn and salt and quenching. Small soft-iron files are packed in lard, goatskin and clay instead.
Lanjutan
About 1 day per few files

Instruksi

1

The hardening mix

Memuat notebook Jupyter…
2

Read De Diversis Artibus, Book III

"Files are made from pure steel, large and moderately sized, triangular and round. Others also are made which are stronger in the middle, from soft iron inside, but outwardly they are covered with steel."
3

Forge and smooth the blanks

Beat steel (or soft iron covered with steel) to the size and shape wanted: large or moderate, triangular or round; for small files, square, round, triangular or thin. Smooth them on a planing instrument (a filing or scraping bed).

Material untuk langkah ini:

Batang baja karbon (0,6 % C)Batang baja karbon (0,6 % C)1 buah
Batang besi tempaBatang besi tempa1 buah

Alat yang dibutuhkan:

Tungku TempaTungku Tempa
Ubub (Pengembus)Ubub (Pengembus)
Landasan TempaLandasan Tempa
PaluPalu
Penjepit TempaPenjepit Tempa
Kikir (Kikir Tangan)Kikir (Kikir Tangan)
4

Cut the teeth

Mark out the teeth with a hammer sharp on both sides, or with the cutting iron, until the file is cut all over.

Alat yang dibutuhkan:

PaluPalu
Pahat pembuat gigi kikirPahat pembuat gigi kikir
Landasan TempaLandasan Tempa
Ragum MejaRagum Meja
5

Temper with horn and salt

Burn an ox horn in the fire, scrape it, mix it with a third part of salt and grind it hard. Heat the file until it glows, sprinkle the mixture over it everywhere, lay hot coals on and blow quickly over the whole without letting the coating fall off; then draw it out and quench it evenly in water, and dry it slightly over the fire. He tempers all steel things this way.

Material untuk langkah ini:

Tanduk sapiTanduk sapi1 buah
GaramGaram1 buah

Alat yang dibutuhkan:

Tungku TempaTungku Tempa
Ubub (Pengembus)Ubub (Pengembus)
PipetPipet
Penjepit TempaPenjepit Tempa
Ember pendingin tempaEmber pendingin tempa
6

Or pack small soft-iron files

For small soft-iron files, after cutting, anoint them with the grease of an old hog, bind them with small straps of buck-goat skin tied with flaxen thread, and cover each with beaten clay, leaving the handles (tangs) bare. Dry them, put them in the fire and blow strongly until the skin is burned, take them quickly out of the clay, quench evenly in water, and dry them at the fire.

Material untuk langkah ini:

Lemak babi (lemak ginjal dan lemak punggung)Lemak babi (lemak ginjal dan lemak punggung)1 buah
Kulit kambingKulit kambing1 buah
Benang linenBenang linen1 buah
LempungLempung1 buah

Alat yang dibutuhkan:

Tungku TempaTungku Tempa
Ubub (Pengembus)Ubub (Pengembus)
Penjepit TempaPenjepit Tempa
Ember pendingin tempaEmber pendingin tempa
Pisau kulitPisau kulit
7

Troubleshooting

File troubleshooting.

Flow

Loading...
8

History and honest limits

From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapters XVII-XIX, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 223-225). He gives no sizes, temperatures or tooth spacing. The tools and the case-hardening explanation are ours.

Bahan

8

Alat yang Diperlukan

11

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...