Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Tweezers: Bent from a Thin Brass Strip (Cassell's, 1900)
Fine tweezers from a single strip of thin sheet brass, bent double so the spring of the bend holds the tips apart. Cassell's gives them for handling dead insects by the thorax.
Variable: strip 3/8 or 1/2 in wide, 6 or 8 in long.
Source: Cassell's Cyclopaedia of Mechanics (1900), p. 72. Picture: drawn by Youblob from the text.
Pemula
Unknown
Instruksi
1
1
Cut the strip
Cut the strip
Cut a strip of thin sheet brass 3/8 or 1/2 in wide and 6 or 8 in long.
Material untuk langkah ini:
Lembaran Kuningan1 stripAlat yang dibutuhkan:
Gunting seng2
2
Bend it double
Bend it double
Bend the strip double at the middle until the two ends meet. Ease the bend so that its spring holds the ends about 3/4 to 1 in apart when free.
Alat yang dibutuhkan:
Ragum Meja
Palu3
3
Point the ends
Point the ends
File the two ends to a blunt point.
Alat yang dibutuhkan:
Kikir LogamBahan
1- 1 stripPlaceholder
Alat yang Diperlukan
4- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.
