SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Two-Current Separator Rocking Churn: An Oval Cistern Split Round a Separator, the Currents Collide at Each Tip
YourGrandma

Dibuat oleh

YourGrandma

7. Oktober 2026IS
9
0
0
0
0

Two-Current Separator Rocking Churn: An Oval Cistern Split Round a Separator, the Currents Collide at Each Tip

Daniel E. True of Lake Village, New Hampshire, received US 18,165, dated 8 September 1857, for a rocking churn whose oval cistern has a "separator" of the same shape in its middle, so the cream flows in two currents that "come in direct collision from opposite directions, at each tip." This rung prints the cistern and the separator lid, builds the swing seat and makes butter.
Pemula
About 3 hours, plus printing

Instruksi

1

His sizes at one third

Memuat notebook Jupyter…
2

A rocking churn he names

True names McLaughlin's and Enoch Thomas's patents and does not claim their grates; he claims the separator.
3

Read US 18,165

"The operation being accomplished by oscillating the swing seat C, which gives to the cream cistern a successive tip motion, Fig. 1, red lines, thereby causing the cream to flow rapidly, being divided by the separator, into two separate currents in its passage, which come in contact at their terminus, alternately, whereby the cream receives a violent and peculiar action which causes a speedy union of the particles of butter into one mass."
4

Print the parts

Print the oval cistern (/uploads/blueprints/two-current-separator-rocking-churn-cistern.stl) and the lid with its separator (/uploads/blueprints/two-current-separator-rocking-churn-separator-lid.stl). The cistern needs a bed at least 210 mm long. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Material untuk langkah ini:

Filamen PETGFilamen PETG1 buah

Alat yang dibutuhkan:

Pencetak 3D filamen (FDM)Pencetak 3D filamen (FDM)
5

Frame and swing seat

Build a pine frame about 220 mm high and hang a pine seat between its uprights on a 10 mm rod, with two side strips that enter the cistern's guides. Hang a steel rod from the seat's middle with a stack of nuts as the pendulum weight.

Material untuk langkah ini:

Papan pinusPapan pinus1 buah
Batang Baja LunakBatang Baja Lunak1 buah
Mur Segi EnamMur Segi Enam6 buah
Sekrup kayu #8 x 1"Sekrup kayu #8 x 1"1 buah

Alat yang dibutuhkan:

Gergaji TanganGergaji Tangan
Bor Tanpa KabelBor Tanpa Kabel
Set Mata BorSet Mata Bor
Set obengSet obeng
6

Corks

Plug the lid's two ventilators and the cistern's outlet with corks.

Material untuk langkah ini:

Sumbat gabusSumbat gabus3 buah
7

The patent drawing

US 18,165 drawing sheet, public domain (expired patent).
Langkah 7 - Image 1
8

Rock and churn

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 600 ml and fit the lid with its separator. Rock the seat end to end steadily; time until the butter comes. Draw off the buttermilk at the outlet. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Material untuk langkah ini:

Krim kentalKrim kental600 ml
Garam Laut KasarGaram Laut Kasar1 buah
AirAir1 buah

Alat yang dibutuhkan:

Termometer probe tinggal-pasangTermometer probe tinggal-pasang
StopwatchStopwatch
Timbangan Dapur DigitalTimbangan Dapur Digital
Mangkuk aduk baja nirkarat (besar)Mangkuk aduk baja nirkarat (besar)
9

Troubleshooting

Two-current churn troubleshooting.

Flow

Loading...
10

History and honest limits

**Daniel E. True** of Lake Village, Belknap County, New Hampshire, US 18,165, 8 September 1857. His frame was 2 feet high. He wrote that grate and perforated dashers were not new, naming Enoch Thomas's and John McLaughlin's patents, and claimed the separator in rocking churns. A printed cistern at one third of his size, pine and nuts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn.

Bahan

9

Alat yang Diperlukan

9

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...