Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Wash Bottle: a Laboratory Wash Bottle with a Slit Valve (Boy Mechanic, 1915)
A wide-mouthed bottle with a three-tube stopper that squirts a steady stream of water for rinsing glassware and washing precipitates. Blow into one tube to pressurise it; a slit rubber valve holds the pressure, and your thumb on a relief tube starts and stops the jet at once.
Source: The Boy Mechanic, Book 2 (1915), p. 458. Unknown: sizes. Picture: the book's sketch.
Pemula
Unknown
Instruksi
1
1
Bore the stopper
Bore the stopper
Fit a stopper to a large-mouthed bottle and bore three holes through it for the tubes.
Material untuk langkah ini:
Botol kaca (bening)1 large mouth
Sumbat karet1 buahAlat yang dibutuhkan:
Pelubang gabus2
2
Make the tubes
Make the tubes
Use brass or glass tubes. Bend the nozzle tube E so it reaches the bottom and points out over the side (sketch); the air tube A and relief tube D only pass through the stopper.
Material untuk langkah ini:
Tabung kaca3 buahAlat yang dibutuhkan:
Obor peniup kaca meja3
3
Fit the slit valve
Fit the slit valve
On the lower end of air tube A fit a thick piece of rubber tubing B, stoppered at its bottom end, and cut a slit C in its side: blown air opens it, and it closes again to hold the pressure. Push the three tubes through the stopper and fit it in the bottle. To use: fill with water, blow into A, then close D with your thumb; water jets steadily from E and stops the moment the thumb lifts.
Material untuk langkah ini:
Selang Karet1 thick, short pieceAlat yang dibutuhkan:
Pisau KerajinanBahan
4- 1 large mouthPlaceholder
- 1 buahPlaceholder
- 3 buahPlaceholder
- 1 thick, short piecePlaceholder
Alat yang Diperlukan
3- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.
