Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay.
Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast.
Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
Pemula
Unknown
Instruksi
1
1
Make the top
Make the top
Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.
Material untuk langkah ini:
Papan kayu1 two-inch plank, about 30 x 20 in
Papan1 raised edge, 2 in high
Paku Besi1 buahAlat yang dibutuhkan:
Gergaji Tangan
Palu2
2
Pour the plaster
Pour the plaster
Fill the trough with plaster and let it harden.
Material untuk langkah ini:
Gips (Plaster of Paris)1 buahAlat yang dibutuhkan:
Palu3
3
Fit the post and wire
Fit the post and wire
Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.
Material untuk langkah ini:
Bahan tidak diketahui1 upright post, material not given
Kawat kuningan halus1 fine brass wire
Paku Besi1 buahAlat yang dibutuhkan:
Palu
Gergaji TanganBahan
6- 1 two-inch plank, about 30 x 20 inPlaceholder
- 1 raised edge, 2 in highPlaceholder
- 2 buahPlaceholder
- 1 buahPlaceholder
- 1 upright post, material not givenPlaceholder
- 1 fine brass wirePlaceholder
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.
