Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Worm-Drive Hose Clamp: North & Burke, 1945
Edwin W. North and William O. Burke of the National Lock Company, Rockford, Illinois, patented this hose clamp in 1945, US 2,386,629, for hoses carrying compressed air, gasoline and other fluids in aircraft. A band of resilient spring steel is pierced with a row of slanted slots, which a stamping operation can make, set at the angle of the screw thread. A U-shaped saddle is spot welded near one end of the band, and a housing riveted to it holds a screw whose thread runs through the slots. Turning the screw draws the band tight. One clamp fits a wide range of hose sizes.
Menengah
Factory process
Instruksi
1
1
Slot the band
Slot the band
Stamp a row of transverse slots along the spring steel band, inclined to match the spiral thread of the screw.
Material untuk langkah ini:
Pita baja pegas1 as requiredAlat yang dibutuhkan:
Mesin tekan stamping2
2
Saddle
Saddle
Spot weld the U-shaped saddle, its base curved along the band, near the band's inner end. The band is set up by the base's thickness so the base's curved inner surface continues the band's.
Material untuk langkah ini:
Sadel klem selang1 buahAlat yang dibutuhkan:
Mesin las titik3
3
Screw and housing
Screw and housing
Lay the screw, with its continuous spiral thread, in the saddle with its reduced ends in the slots of the housing's end walls. Fit the housing over it: the prongs on the saddle's side walls pass through openings in the housing's flanges and are riveted over to fix them together.
Material untuk langkah ini:
Sekrup cacing klem selang1 buah
Rumah sekrup klem selang1 buah4
4
Fit
Fit
Pass the band's free end round the hose and under the screw: the thread engages the slots, and turning the screw draws the band tight.
Bahan
4- 1 as requiredPlaceholder
- 1 buahPlaceholder
- Placeholder
- 1 buahPlaceholder
Alat yang Diperlukan
2- Placeholder
- Mesin las titikkomisi 10%Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.