SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Woven Glass Fibre Cloth, Style 112: Plain Weave of E-glass Yarn
Thin glass cloth is the skeleton of resin laminates. This is Type I (commercial style 112) of the US standard MIL-C-9084C (1970): a plain weave of E-glass yarn ECD 450-1/2 both ways, at least 39 by 38 yarns per inch, 0.0030–0.0050 in thick, 38 in wide. Woven, it is greige cloth; its finish must make it bond to the resin it goes into (epoxy for Class 2).
The picture: two plain-woven glass fabrics, 220 and 550 g/m², heavier than style 112 (Cjp24, Wikimedia Commons, public domain).
Menengah
2 days
Instruksi
1
1
Wind the warp
Wind the warp
Warp with yarn ECD 450-1/2, at least 39 ends per inch across a width of 38 in including the selvages (about 1,480 ends; ours, from 39 × 38). Ours: a warping frame and floor loom.
Material untuk langkah ini:
Benang Kaca E1 as requiredAlat yang dibutuhkan:
Rangka penghani
Alat tenun berpedal
Sarung tangan karet2
2
Weave plain, 38 picks per inch
Weave plain, 38 picks per inch
Weave plain (over one, under one) with the same yarn as filling, at least 38 picks per inch (15 per cm). Ours: a boat shuttle.
Alat yang dibutuhkan:
Alat tenun berpedal
Torak perahu
Penggulung sekociSarung tangan karet3
3
Check and finish the cloth
Check and finish the cloth
The cloth must be 0.0030–0.0050 in (0.08–0.13 mm) thick, weigh 1.94–2.18 oz per square yard (66–74 g/m²) and be 38 in wide (−0.25/+0.50 in). Its finish may be just a cleaning that removes processing oils and binders, if the cloth then bonds well to its resin, or a cleaning followed by, for example, a resin-coupling agent. The standard gives no method; the finished cloth must pass its laminate tests (Class 2 for epoxy).
Alat yang dibutuhkan:
Neraca lenganBahan
1- 1 as requiredPlaceholder
Alat yang Diperlukan
6- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.