Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Metal Oxide Varistor: Zinc Oxide with 0.2 % Manganese Dioxide, Bismuth Oxide Paste Fired On (Masuyama 1972, Ex. 5)
Ed

Dibuat oleh

Ed

28. Oktober 2026FI
6
0
0
0
0

Metal Oxide Varistor: Zinc Oxide with 0.2 % Manganese Dioxide, Bismuth Oxide Paste Fired On (Masuyama 1972, Ex. 5)

A varistor with bismuth oxide fired on from a paste instead of mixed in: 99.8 % zinc oxide with 0.2 % manganese dioxide by moles, sintered at 1350 °C, coated with bismuth oxide paste and fired at 800 °C. The disc measured a C-value of 114 at 1 mA and a nonlinearity exponent n of 15.3. Source: T. Masuyama, M. Matsuoka and T. Nishi (Matsushita), US 3,663,458 (1972), Example 5. Unknown: what the silver paint is, and how strong the epoxy solution of the paste is. The spraying is ours, after US Army Corps of Engineers EM 1110-2-3401 (1999). The 10 g batch is our arithmetic. Picture: the patent's drawing.
Lanjutan
2 days

Instruksi

1

Weigh 99.8 : 0.2 and wet-mill 5 hours

Mix zinc oxide and manganese dioxide 99.8 : 0.2 by moles. Ours, for 10 g: 9.979 g zinc oxide and 0.021 g manganese dioxide (our arithmetic). Mill wet for 5 hours, then dry, as in Example 1. Unknown: the milling liquid.

Material untuk langkah ini:

Serbuk Seng OksidaSerbuk Seng Oksida9.979 g
Mangan dioksida (pirolusit)Mangan dioksida (pirolusit)0.021 g

Alat yang dibutuhkan:

Neraca lenganNeraca lengan
Ball Mill BesiBall Mill Besi
Oven pengeringanOven pengeringan
2

Press discs 13 mm by 2.5 mm

Press discs 13 mm across and 2.5 mm thick at 340 kg/cm², as in Example 1.

Alat yang dibutuhkan:

Mesin pres hidrolikMesin pres hidrolik
Cetakan press cakramCetakan press cakram
Jangka Sorong VernierJangka Sorong Vernier
3

Sinter 1 hour at 1350 °C and furnace-cool

As in Example 2: sinter in air at 1350 °C for 1 hour and let the discs cool in the furnace.

Alat yang dibutuhkan:

Tungku MuffleTungku Muffle
4

Lap both faces

Lap both faces with silicon carbide abrasive. Example 5 gives no thickness.

Alat yang dibutuhkan:

Butiran silikon karbidaButiran silikon karbida
Jangka Sorong VernierJangka Sorong Vernier
5

Coat with bismuth oxide paste and fire at 800 °C

Coat both lapped faces with a paste of 50 % by weight bismuth oxide in a solution of epoxy resin in butyl alcohol, and fire it in air at 800 °C for 30 minutes. The bismuth oxide diffuses into the zinc oxide. Not given: how much paste, or the strength of the epoxy solution.

Material untuk langkah ini:

Bismut oksidaBismut oksida1 as required

Alat yang dibutuhkan:

Resin epoksiResin epoksi
n-Butanoln-Butanol
Tungku MuffleTungku Muffle
6

Spray aluminium electrodes and attach leads

Spray a metallised film of aluminium on both faces. Attach a lead wire to each with conductive silver paint, as in Example 1. Ours, after US Army Corps of Engineers EM 1110-2-3401 (1999): wire-arc spray the aluminium from two 3.2 mm wires melted by an 18-40 V DC arc and atomised by compressed air, 15-20 cm from the disc and never at less than 45°, in at least two coats at right angles of 50-75 µm each. Unknown: the paint.

Material untuk langkah ini:

Batangan aluminiumBatangan aluminium1 as 3.2 mm spray wire
Cat perak penghantar listrikCat perak penghantar listrik1 as required
Kawat TembagaKawat Tembaga2 buah

Alat yang dibutuhkan:

Jangka Sorong VernierJangka Sorong Vernier
Pistol semprot busur kawatPistol semprot busur kawat
Kompresor udara industriKompresor udara industri

Bahan

6

Alat yang Diperlukan

12

Blueprint terkait

Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...