SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Metal Oxide Varistor: Zinc Oxide with Bismuth, Manganese and Barium Oxides, 1350 °C (Masuyama 1972, Ex. 3)
Masuyama, Matsuoka and Nishi found that adding two more oxides to zinc oxide and bismuth oxide gives excellent non-linear properties. This is their Example 3 with manganese dioxide and barium oxide: 98.5 % zinc oxide and 0.5 % each of bismuth oxide, manganese dioxide and barium oxide by moles, sintered at 1350 °C. The disc measured a C-value of 73 at 1 mA and a nonlinearity exponent n of 21.5.
Source: T. Masuyama, M. Matsuoka and T. Nishi (Matsushita), US 3,663,458 (1972), Example 3. Unknown: how the aluminium is sprayed on and what the silver paint is. The 10 g batch is our arithmetic. Picture: the patent's drawing.
Lanjutan
1 day
Instruksi
1
1
Weigh 98.5 : 0.5 : 0.5 : 0.5 and wet-mill 5 hours
Weigh 98.5 : 0.5 : 0.5 : 0.5 and wet-mill 5 hours
Mix zinc oxide, bismuth oxide, manganese dioxide and barium oxide 98.5 : 0.5 : 0.5 : 0.5 by moles. Ours, for 10 g: 9.578 g zinc oxide, 0.278 g bismuth oxide, 0.052 g manganese dioxide, 0.092 g barium oxide (our arithmetic). Mill wet for 5 hours, then dry. Unknown: the milling liquid.
Material untuk langkah ini:
Serbuk Seng Oksida9.578 g
Bismut oksida0.278 g
Mangan dioksida (pirolusit)0.052 g
Barium oksida0.092 gAlat yang dibutuhkan:
Neraca lengan
Ball Mill Besi
Oven pengeringan2
2
Press discs 13 mm by 2.5 mm
Press discs 13 mm by 2.5 mm
Press the powder in a mould into discs 13 mm across and 2.5 mm thick at 340 kg/cm², as in Example 1.
Alat yang dibutuhkan:
Mesin pres hidrolik
Cetakan press cakram
Jangka Sorong Vernier3
3
Sinter 1 hour at 1350 °C and furnace-cool
Sinter 1 hour at 1350 °C and furnace-cool
Sinter the discs in air at 1350 °C for 1 hour, then let them cool in the furnace to room temperature (about 15-30 °C).
Alat yang dibutuhkan:
Tungku Muffle4
4
Lap to 10 mm by 1.5 mm
Lap to 10 mm by 1.5 mm
Lap both faces with 600-mesh silicon carbide. The finished disc is 10 mm across and 1.5 mm thick.
Alat yang dibutuhkan:
Butiran silikon karbidaJangka Sorong Vernier5
5
Spray aluminium electrodes and attach leads
Spray aluminium electrodes and attach leads
Spray a metallised film of aluminium on both faces. Attach a lead wire to each with conductive silver paint. Unknown: the spraying method and the paint.
Material untuk langkah ini:
Batangan aluminium1 as required
Cat perak penghantar listrik1 as required
Kawat Tembaga2 buahAlat yang dibutuhkan:
Metode semprot logam yang tidak diketahuiJangka Sorong VernierBahan
7- 9.578 gPlaceholder
- 0.278 gPlaceholder
- 0.052 gPlaceholder
- 0.092 gPlaceholder
- 1 as requiredPlaceholder
- 1 as requiredPlaceholder
- 2 buahPlaceholder
Alat yang Diperlukan
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.