कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Barium Ferrite Disc Magnet: 1 mol BaCO3 to 2.5 mol Iron Oxide, 1310 °C (Went, Philips 1956, Ex. 1)
Charlie

द्वारा बनाया गया

Charlie

28. अक्टूबर 2026DE
2
0
0
0
0

Barium Ferrite Disc Magnet: 1 mol BaCO3 to 2.5 mol Iron Oxide, 1310 °C (Went, Philips 1956, Ex. 1)

Went's first barium ferrite: 1 mol barium carbonate to 2.5 mol iron oxide, milled 13.5 hours, bound, formed and passed through a 1310 °C furnace in 20 minutes. His rod held 1,200 gauss with a coercive force of 1,940 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 1. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
उन्नत
2 days

निर्देश

1

Weigh barium carbonate and iron oxide

Weigh 201.1 g barium carbonate (1 mol) and 400.5 g ferric oxide (2.5 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

इस चरण के लिए सामग्री:

बेरियम कार्बोनेट (विदराइट)बेरियम कार्बोनेट (विदराइट)201.1 ग्रा
फेरिक ऑक्साइडफेरिक ऑक्साइड400.5 ग्रा

आवश्यक उपकरण:

तराजूतराजू
रबर के दस्तानेरबर के दस्ताने
P100 श्वासयंत्रP100 श्वासयंत्र
2

Mill with alcohol 13.5 hours, dry and sieve

Grind the mixture with alcohol in a ball mill for 13.5 hours, then dry it and sieve it.

आवश्यक उपकरण:

लोहे की बॉल मिललोहे की बॉल मिल
एथेनॉल - प्रयोगशाला श्रेणी, 95 %एथेनॉल - प्रयोगशाला श्रेणी, 95 %
सुखाने की भट्ठीसुखाने की भट्ठी
छलनीछलनी
3

Knead with a binder and form

Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.

आवश्यक उपकरण:

पॉलीविनाइल अल्कोहल पाउडरपॉलीविनाइल अल्कोहल पाउडर
हाइड्रोलिक प्रेसहाइड्रोलिक प्रेस
डिस्क दबाने की डाईडिस्क दबाने की डाई
सुखाने की भट्ठीसुखाने की भट्ठी
4

Pass through a 1310 °C zone in 20 minutes

Sinter in air at 1310 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.

आवश्यक उपकरण:

ट्यूब फ़र्नेसट्यूब फ़र्नेस
ताप-रोधी दस्तानेताप-रोधी दस्ताने
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

आवश्यक उपकरण:

विद्युत-चुंबकविद्युत-चुंबक
दिक्सूचकदिक्सूचक

सामग्री

2

आवश्यक उपकरण

14

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...