कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Bromide Paper: Gelatino-Bromide Emulsion Coated on Paper
Charlie

द्वारा बनाया गया

Charlie

18. अक्टूबर 2026DE
13
0
0
0
0

Bromide Paper: Gelatino-Bromide Emulsion Coated on Paper

Bromide paper is paper coated with silver bromide in gelatin, the printing and enlarging paper of the darkroom. Thorpe (1913) gives a beginner's emulsion: gelatin swelled in potassium bromide solution, silver nitrate made clear with strong ammonia, the two joined under ruby light, ripened, set, washed, and spread on paper as on a glass plate. From the moment the silver goes in, work only by ruby light. Grain and ounce figures are Thorpe's; the gram conversions and the 10-sheet batch are ours. The picture: our own drawing.
उन्नत
4 days

निर्देश

1

Swell the gelatin

Dissolve 185 grains (12.0 g) of potassium bromide in 5 oz (142 ml) of water. Cover 300 grains (19.4 g) of hard gelatin with it and stir until it softens and swells.

इस चरण के लिए सामग्री:

पोटैशियम ब्रोमाइडपोटैशियम ब्रोमाइड12 ग्रा
जिलेटिन चूर्णजिलेटिन चूर्ण19.4 ग्रा

आवश्यक उपकरण:

जलजल
काँच का बीकरकाँच का बीकर
काँच की हिलाने वाली छड़काँच की हिलाने वाली छड़
तराजूतराजू
2

Dissolve the silver

Dissolve 231 grains (15.0 g) of silver nitrate in 5 oz (142 ml) of water with gentle heat in the water bath. Add strong ammonia (0.880) a little at a time, stirring, until the precipitate that first forms dissolves again.

इस चरण के लिए सामग्री:

सिल्वर नाइट्रेटसिल्वर नाइट्रेट15 ग्रा

आवश्यक उपकरण:

जलजल
तेज़ अमोनिया घोल (0.880)तेज़ अमोनिया घोल (0.880)
काँच का बीकरकाँच का बीकर
काँच की हिलाने वाली छड़काँच की हिलाने वाली छड़
बड़ा पतीला (निचला, जल-स्नान के लिए)बड़ा पतीला (निचला, जल-स्नान के लिए)
3

Melt the gelatin, never above 35 °C

Stand both vessels in the pan of water, never above 35 °C, stirring, until the gelatin is perfectly liquid. Up to here ordinary light is fine.

आवश्यक उपकरण:

बड़ा पतीला (निचला, जल-स्नान के लिए)बड़ा पतीला (निचला, जल-स्नान के लिए)
तापमापीतापमापी
काँच की हिलाने वाली छड़काँच की हिलाने वाली छड़
4

Add the silver under ruby light

From now on, ruby light only. Pour the silver solution into the gelatin in a thin stream, stirring all the time. Rinse the silver beaker with about 1 oz (28 ml) of warm water into the emulsion.

आवश्यक उपकरण:

रूबी सेफ़लाइटरूबी सेफ़लाइट
काँच का बीकरकाँच का बीकर
काँच की हिलाने वाली छड़काँच की हिलाने वाली छड़
जलजल
5

Ripen

Leave the emulsion in the hot water for half to three-quarters of an hour.

आवश्यक उपकरण:

बड़ा पतीला (निचला, जल-स्नान के लिए)बड़ा पतीला (निचला, जल-स्नान के लिए)
रूबी सेफ़लाइटरूबी सेफ़लाइट
6

Set in the dark

Pour it into a flat dish, put it in a light-tight box and let it set for at least 24 hours; two or three days is better.

आवश्यक उपकरण:

उथली चीनी मिट्टी की तश्तरियाँउथली चीनी मिट्टी की तश्तरियाँ
प्रकाशरोधी बक्साप्रकाशरोधी बक्सा
7

Wash through canvas

Scrape the set jelly onto wet coarse canvas and tie it into a bag. Knead it under water so it squeezes through in threads. Pour off the water, cover with fresh, wait 5 minutes and pour off: six to eight times.

आवश्यक उपकरण:

पलटापलटा
कैनवास कपड़ाकैनवास कपड़ा
डोरीडोरी
जलजल
रूबी सेफ़लाइटरूबी सेफ़लाइट
8

Drain and store

Turn the threads onto a strainer covered with a cloth and let the water drain. Rinse with methylated spirit and keep in a lidded jar until coating.

आवश्यक उपकरण:

छननीछननी
मलमल का कपड़ामलमल का कपड़ा
विकृतीकृत ऐल्कोहॉलविकृतीकृत ऐल्कोहॉल
ढक्कनदार काँच के मर्तबानढक्कनदार काँच के मर्तबान
रूबी सेफ़लाइटरूबी सेफ़लाइट
9

Coat the paper

Melt the emulsion in the warm water bath. Lay a sheet of paper flat on a levelled glass slab. Pour emulsion on the middle to cover nearly half the sheet, and spread it to each end with a glass rod 2 inches wider than the sheet, held just off the surface.

इस चरण के लिए सामग्री:

कागज़कागज़10 शीट

आवश्यक उपकरण:

बड़ा पतीला (निचला, जल-स्नान के लिए)बड़ा पतीला (निचला, जल-स्नान के लिए)
काँच की चादरकाँच की चादर
साहुल-स्तर (स्पिरिट लेवल)साहुल-स्तर (स्पिरिट लेवल)
काँच की हिलाने वाली छड़काँच की हिलाने वाली छड़
रूबी सेफ़लाइटरूबी सेफ़लाइट
10

Dry

When the coat has set, move the sheets to a rack in a drying box with a current of air. They dry in 12 to 48 hours. Keep them in the light-tight box.

आवश्यक उपकरण:

सुखाने की टाँड़सुखाने की टाँड़
प्रकाशरोधी बक्साप्रकाशरोधी बक्सा

सामग्री

4

आवश्यक उपकरण

20

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...