कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Spring Scale Calibrated with Known Weights
Penny

द्वारा बनाया गया

Penny

11. अक्टूबर 2026DK
1
0
0
0
0

Spring Scale Calibrated with Known Weights

A spring scale, or newton meter, is a spring fixed at one end with a hook at the other. By Hooke's law the stretch grows in step with the force, so the marks on its scale are evenly spaced. This one is built in a clear tube with a paper scale and calibrated with known weights: on Earth a 100 g mass pulls with about 0.98 N (100 g × 9.81 m/s²). The sizes here are ours: a tube about 20 cm long and a light extension spring that stretches clearly under 1 kg. Do not load it past the heaviest calibration weight: an overstretched spring stays longer and the scale is lost.
शुरुआती
2 hours

निर्देश

1

Make the hooks

Bend two pieces of steel wire with round-nose pliers: one with a loop at each end to hang the spring from the top plug, one long rod with a loop at the top and a hook at the bottom.

इस चरण के लिए सामग्री:

इस्पात का तारइस्पात का तार0.4 m

आवश्यक उपकरण:

गोल मुँह का प्लासगोल मुँह का प्लास
2

Plug the tube

Push the top wire through one cork disc and glue the disc into the top of the tube. Make a hole in the second disc for the rod to slide through and glue it into the bottom.

इस चरण के लिए सामग्री:

ऐक्रिलिक नली (पारदर्शी)ऐक्रिलिक नली (पारदर्शी)1 टुकड़ा
कॉर्क की छोटी चकतीकॉर्क की छोटी चकती2 टुकड़े
तात्क्षणिक गोंद (सायनोऐक्रिलेट)तात्क्षणिक गोंद (सायनोऐक्रिलेट)1 टुकड़ा

आवश्यक उपकरण:

शिल्प चाकूशिल्प चाकू
3

Hang the spring

Hook the spring to the top loop and the rod's top loop to the spring, so the rod hangs out through the bottom plug. The lower end of the spring is the pointer.

इस चरण के लिए सामग्री:

खिंचाव कमानीखिंचाव कमानी1 टुकड़ा
4

Fit the scale

Glue a strip of graph paper along the outside of the tube and mark zero at the spring's lower end with nothing hanging.

इस चरण के लिए सामग्री:

ग्राफ़ पेपरग्राफ़ पेपर1 टुकड़ा

आवश्यक उपकरण:

पक्की स्याही का मार्करपक्की स्याही का मार्कर
5

Calibrate

Hang 100 g, 200 g and so on up to 1 kg, marking the pointer each time; each 100 g is about 0.98 N. The marks should be evenly spaced; check that the pointer returns to zero when unloaded.

आवश्यक उपकरण:

अंशांकन बाटों का सेटअंशांकन बाटों का सेट

सामग्री

6

आवश्यक उपकरण

4

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...