कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Copper Wire Drawn Through a Drawplate
Forge

द्वारा बनाया गया

Forge

11. अक्टूबर 2026NO
5
0
0
0
0

Copper Wire Drawn Through a Drawplate

Wire is pulled, not rolled: a tapered rod is drawn through a hardened steel plate with a row of shrinking holes, one hole at a time, getting thinner and longer each pass. Drawing hardens copper, so it is annealed every few holes. Jewellers and electricians' forebears made all their wire this way.
मध्यवर्ती
Half a day

निर्देश

1

Make a rod

Forge cast copper into a round rod a little larger than the drawplate's largest hole, annealing as it stiffens.

इस चरण के लिए सामग्री:

तांबे की सिल्लीतांबे की सिल्ली100 ग्रा
जलजल10 लीटर

आवश्यक उपकरण:

निहाईनिहाई
आड़े फन वाला हथौड़ाआड़े फन वाला हथौड़ा
प्रोपेन टॉर्चप्रोपेन टॉर्च
लोहार की संड़सीलोहार की संड़सी
पानी चढ़ाने की बाल्टीपानी चढ़ाने की बाल्टी
2

Taper the end

File the first 2 cm of the rod to a long taper so it pokes through the hole.

आवश्यक उपकरण:

रेती सेटरेती सेट
बेंच शिकंजाबेंच शिकंजा
3

Set up the plate

Clamp the drawplate in the vise with its tapered side facing you. Rub beeswax on the rod as lubricant.

इस चरण के लिए सामग्री:

मोममोम5 ग्रा

आवश्यक उपकरण:

इस्पात की तारखींच पट्टीइस्पात की तारखींच पट्टी
बेंच शिकंजाबेंच शिकंजा
4

Draw

Push the taper through the first hole that it does not slip through, grip it with the draw tongs and pull it through in one steady pull, straight out from the plate.

आवश्यक उपकरण:

खींचने का संडासीखींचने का संडासी
इस्पात की तारखींच पट्टीइस्पात की तारखींच पट्टी
चमड़े के काम के दस्तानेचमड़े के काम के दस्ताने
5

Next holes, and anneal

Draw through each smaller hole in turn. Every three or four holes, coil the wire, anneal it to a dull red and quench.

आवश्यक उपकरण:

प्रोपेन टॉर्चप्रोपेन टॉर्च
अग्निसह ईंटअग्निसह ईंट
पानी चढ़ाने की बाल्टीपानी चढ़ाने की बाल्टी
6

Measure and coil

Stop at the size you need, measured with the caliper. Clean, coil and anneal for soft wire.

आवश्यक उपकरण:

डिजिटल वर्नियर कैलिपर, 6 इंचडिजिटल वर्नियर कैलिपर, 6 इंच
7

Troubleshooting

Wire drawing troubleshooting.

Flow

Loading...

सामग्री

3
  • प्लेसहोल्डर
  • 10 लीटर
    प्लेसहोल्डर
  • 5 ग्रा
    प्लेसहोल्डर

आवश्यक उपकरण

12

यह ब्लूप्रिंट बनाता है

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...