कला
सौंदर्य और कल्याण
हस्तशिल्प
संस्कृति और इतिहास
मनोरंजन
पर्यावरण
खाद्य और पेय
रिवर्स इंजीनियरिंग
विज्ञान
खेल
प्रौद्योगिकी
पहनने योग्य
Emery Cloth: Graded Grit Between a Make Coat and a Size Coat
Mary

द्वारा बनाया गया

Mary

11. अक्टूबर 2026FI
1
0
0
0
0

Emery Cloth: Graded Grit Between a Make Coat and a Size Coat

Emery cloth is a coated abrasive: grains of emery, a natural abrasive used for polishing metal, glued to one face of a cloth backing. Cloth is chosen over paper where durability matters. The grit is graded to one size, glued down with a make coat, and locked in with a second size coat. Hide glue is the traditional adhesive; it does not stand the heat of machine sanding and is not waterproof, so resin is used where that matters. Closed-coat cloth has 90–95% of its face covered with grain, open-coat 50–70%, which clogs less on soft materials.
मध्यवर्ती
Factory process

निर्देश

1

Crush and grade the grit

Crush the emery, then sort it to one size: pass coarse grit through successively finer sieves, separate medium grit by air classification, and the finest by water classification, letting particles settle in a tank by how fast they sink.

इस चरण के लिए सामग्री:

एमरी चट्टानएमरी चट्टान1 as required

आवश्यक उपकरण:

चट्टान तोड़ मशीनचट्टान तोड़ मशीन
चलनी सेट (क्रमिक जाली)चलनी सेट (क्रमिक जाली)
वायु वर्गीकारकवायु वर्गीकारक
तलछट टैंकतलछट टैंक
2

Make coat

Run the long ribbon of cloth backing through the coating line and coat one face with adhesive, the make coat that will bind the grit to the cloth.

इस चरण के लिए सामग्री:

सूती कपड़ासूती कपड़ा1 as required
खाल का सरेसखाल का सरेस1 as required

आवश्यक उपकरण:

अपघर्षक लेपन लाइनअपघर्षक लेपन लाइन
3

Coat with grit

Drop the graded grit on to the wet make coat (gravity coating), or pass backing and grit through an electric field so the charged grit is drawn on to the backing (electrostatic coating), which holds it more strongly. Cover 90–95% of the surface for closed coat or 50–70% for open coat.

आवश्यक उपकरण:

अपघर्षक लेपन लाइनअपघर्षक लेपन लाइन
4

Size coat

Apply a second layer of adhesive, the size coat, over the grit to fix it in place.

इस चरण के लिए सामग्री:

खाल का सरेसखाल का सरेस1 as required

आवश्यक उपकरण:

अपघर्षक लेपन लाइनअपघर्षक लेपन लाइन

सामग्री

3
  • प्लेसहोल्डर
  • प्लेसहोल्डर
  • प्लेसहोल्डर

आवश्यक उपकरण

5

यह ब्लूप्रिंट बनाता है

संबंधित ब्लूप्रिंट

ये ब्लूप्रिंट ज्ञान साझा करते हैं — तकनीक, सामग्री या सिद्धांत

CC0 पब्लिक डोमेन

यह ब्लूप्रिंट CC0 के तहत जारी किया गया है। आप बिना अनुमति माँगे इस कार्य को किसी भी उद्देश्य के लिए कॉपी, संशोधित, वितरित और उपयोग करने के लिए स्वतंत्र हैं।

उनके ब्लूप्रिंट के माध्यम से उत्पाद खरीदकर मेकर का समर्थन करें जहाँ वे मेकर कमीशन कमाते हैं जो विक्रेताओं द्वारा निर्धारित होता है, या इस ब्लूप्रिंट का नया संस्करण बनाएँ और राजस्व साझा करने के लिए इसे अपने ब्लूप्रिंट में कनेक्शन के रूप में शामिल करें।

चर्चा

(0)

लॉग इन करें चर्चा में शामिल होने के लिए

टिप्पणियाँ लोड हो रही हैं...